Pramet

Milling & Lathing

KATEGORIER

Visar 1 - 20 av 107 produkter
Jämför valda produkter 0/8
Visa som:
Pris
(Pris visas exkl. moms)
Beskrivning
Artikelinformation
Pramet SCLCR Series Lathe Tool Holder for Use with CC Inserts, 8mm Height, 95° Approach, 100mm Length
  • 2 117,44 krEach
Pramet SCLCR Series Lathe Tool Holder for Use with CC Inserts, 8mm Height, 95° Approach, 100mm Length
  • Lathe PartLathe Tool Holder
  • Approach Angle95°
  • SeriesSCLCR
  • For Use WithCC Inserts
  • Length100mm
Se liknande produkter Lathe Tool Holders & Inserts
Pramet PWLN(RL) INT Series Lathe Tool Holder for Use with WNMG 0604, 20mm Height, 95° Approach, 180mm Length
  • 2 419,55 krEach
Pramet PWLN(RL) INT Series Lathe Tool Holder for Use with WNMG 0604, 20mm Height, 95° Approach, 180mm Length
  • Lathe PartLathe Tool Holder
  • Approach Angle95°
  • SeriesPWLN(RL) INT
  • For Use WithWNMG 0604
  • Length180mm
Se liknande produkter Lathe Tool Holders & Inserts
Pramet DTGNR Series Lathe Tool Holder for Use with TN/TNM Inserts, 20mm Height, 90° Approach, 125mm Length
  • 1 573,37 krEach
Pramet DTGNR Series Lathe Tool Holder for Use with TN/TNM Inserts, 20mm Height, 90° Approach, 125mm Length
  • Lathe PartLathe Tool Holder
  • Approach Angle90°
  • SeriesDTGNR
  • For Use WithTN/TNM Inserts
  • Length125mm
Se liknande produkter Lathe Tool Holders & Inserts
Pramet LFMX Series Lathe Insert Removal Key for Use with Grooving Insert
  • 56,67 krEach
Pramet LFMX Series Lathe Insert Removal Key for Use with Grooving Insert
  • Lathe PartLathe Insert Removal Key
  • SeriesLFMX
  • For Use WithGrooving Insert
Se liknande produkter Lathe Tool Holders & Inserts
Pramet PWLNR Series Lathe Tool Holder for Use with WNMG 0604, 25mm Height, 95° Approach, 150mm Length
  • 1 764,04 krEach
Pramet PWLNR Series Lathe Tool Holder for Use with WNMG 0604, 25mm Height, 95° Approach, 150mm Length
  • Lathe PartLathe Tool Holder
  • Approach Angle95°
  • SeriesPWLNR
  • For Use WithWNMG 0604
  • Length150mm
Se liknande produkter Lathe Tool Holders & Inserts
Pramet SDJCR Series Lathe Tool Holder for Use with DCMT 11T3, 16mm Height, 93° Approach, 100mm Length
  • 1 627,33 krEach
Pramet SDJCR Series Lathe Tool Holder for Use with DCMT 11T3, 16mm Height, 93° Approach, 100mm Length
  • Approach Angle93°
  • Lathe PartLathe Tool Holder
  • SeriesSDJCR
  • For Use WithDCMT 11T3
  • Length100mm
Se liknande produkter Lathe Tool Holders & Inserts
Pramet DCLNR Series Lathe Tool Holder for Use with CN/CNM Inserts, 25mm Height, 95° Approach, 150mm Length
  • 1 725,54 krEach
Pramet DCLNR Series Lathe Tool Holder for Use with CN/CNM Inserts, 25mm Height, 95° Approach, 150mm Length
  • Lathe PartLathe Tool Holder
  • Approach Angle95°
  • SeriesDCLNR
  • For Use WithCN/CNM Inserts
  • Length150mm
Se liknande produkter Lathe Tool Holders & Inserts
Pramet PWLN(RL) EXT Series Lathe Tool Holder for Use with WNMG 0604, 20mm Height, 95° Approach, 125mm Length
  • 1 608,77 krEach
Pramet PWLN(RL) EXT Series Lathe Tool Holder for Use with WNMG 0604, 20mm Height, 95° Approach, 125mm Length
  • Lathe PartLathe Tool Holder
  • Approach Angle95°
  • SeriesPWLN(RL) EXT
  • For Use WithWNMG 0604
  • Length125mm
Se liknande produkter Lathe Tool Holders & Inserts
Pramet XLCFN Series Lathe Tool Holder for Use with LFMX Inserts, 32mm Height, 90° Approach, 150mm Length
  • 1 582,19 krEach
Pramet XLCFN Series Lathe Tool Holder for Use with LFMX Inserts, 32mm Height, 90° Approach, 150mm Length
  • Lathe PartLathe Tool Holder
  • Approach Angle90°
  • SeriesXLCFN
  • For Use WithLFMX Inserts
  • Length150mm
Se liknande produkter Lathe Tool Holders & Inserts
Pramet 19° Face Mill 42mm, Diameter, 3, Pieces
  • 4 378,30 krEach
Pramet 19° Face Mill 42mm, Diameter, 3, Pieces
  • Diameter42mm
  • Bore Size16mm
  • Number of Inserts3
  • Depth of Cut2mm
  • Height40mm
Se liknande produkter Face Mills
Pramet CNMG Series Lathe Insert for Use with DCLNR 12, 4.76mm Height, 95° Approach, 12.9mm Length
  • 1 383,74 kr1 Box of 10
Pramet CNMG Series Lathe Insert for Use with DCLNR 12, 4.76mm Height, 95° Approach, 12.9mm Length
  • Lathe PartLathe Insert
  • Approach Angle95°
  • SeriesCNMG
  • For Use WithDCLNR 12
  • Length12.9mm
Se liknande produkter Lathe Tool Holders & Inserts
Pramet LFMX Series Lathe Parting Off Insert for Use with XLCFN, 90° Approach, 2.2mm Length
  • 1 519,28 kr1 Box of 10
Pramet LFMX Series Lathe Parting Off Insert for Use with XLCFN, 90° Approach, 2.2mm Length
  • Approach Angle90°
  • Lathe PartLathe Parting Off Insert
  • SeriesLFMX
  • For Use WithXLCFN
  • Length2.2mm
Se liknande produkter Lathe Tool Holders & Inserts
  • RS-artikelnummer
    866-0366
  • Varumärke
    Pramet
  • Tillv. art.nr
    LFMX 2.2-.16SNM2:T8330
Pramet CNMG Series Lathe Insert for Use with DCLNR 12, 4.76mm Height, 95° Approach, 12.9mm Length
  • 1 400,85 kr1 Box of 10
Pramet CNMG Series Lathe Insert for Use with DCLNR 12, 4.76mm Height, 95° Approach, 12.9mm Length
  • Approach Angle95°
  • Lathe PartLathe Insert
  • SeriesCNMG
  • For Use WithDCLNR 12
  • Length12.9mm
Se liknande produkter Lathe Tool Holders & Inserts
Pramet Square Milling Insert 9.53mm Side Length, 3.5mm Bore Diameter
  • 1 345,00 kr1 Box of 10
Pramet Square Milling Insert 9.53mm Side Length, 3.5mm Bore Diameter
  • TypeIndexable
  • ShapeSquare
  • Bore Diameter3.5mm
  • Side Length9.53mm
Se liknande produkter Milling Inserts
Pramet Pentagon Milling Insert 9mm Side Length, 5.5mm Bore Diameter
  • 2 530,64 kr1 Box of 10
Pramet Pentagon Milling Insert 9mm Side Length, 5.5mm Bore Diameter
  • TypeIndexable
  • ShapePentagon
  • Bore Diameter5.5mm
  • Side Length9mm
  • GradeM8345
Se liknande produkter Milling Inserts
  • RS-artikelnummer
    866-0584
  • Varumärke
    Pramet
  • Tillv. art.nr
    PDKT 090530ER-FM:M8345
Pramet CCMT Series Lathe Insert for Use with SCLCR 06, 3.97mm Height, 95° Approach, 9.7mm Length
  • 1 159,68 kr1 Box of 10
Pramet CCMT Series Lathe Insert for Use with SCLCR 06, 3.97mm Height, 95° Approach, 9.7mm Length
  • Lathe PartLathe Insert
  • Approach Angle95°
  • SeriesCCMT
  • For Use WithSCLCR 06
  • Length9.7mm
Se liknande produkter Lathe Tool Holders & Inserts
  • RS-artikelnummer
    866-0433
  • Varumärke
    Pramet
  • Tillv. art.nr
    CCMT 09T308E-FM:T9325
Pramet 19° Face Mill 63mm, Diameter, 5, Pieces
  • 5 928,93 krEach
Pramet 19° Face Mill 63mm, Diameter, 5, Pieces
  • Diameter63mm
  • Bore Size22mm
  • Number of Inserts5
  • Depth of Cut2mm
  • Height40mm
Se liknande produkter Face Mills
Pramet CNMG Series Lathe Insert for Use with DCLNR 12, 4.76mm Height, 95° Approach, 12.9mm Length
  • 1 456,92 kr1 Box of 10
Pramet CNMG Series Lathe Insert for Use with DCLNR 12, 4.76mm Height, 95° Approach, 12.9mm Length
  • Lathe PartLathe Insert
  • Approach Angle95°
  • SeriesCNMG
  • For Use WithDCLNR 12
  • Length12.9mm
Se liknande produkter Lathe Tool Holders & Inserts
  • RS-artikelnummer
    866-0483
  • Varumärke
    Pramet
  • Tillv. art.nr
    CNMG 120404E-FM:T9315
Pramet LFMX Series Lathe Parting Off Insert for Use with XLCFN, 90° Approach, 3.1mm Length
  • 1 643,89 kr1 Box of 10
Pramet LFMX Series Lathe Parting Off Insert for Use with XLCFN, 90° Approach, 3.1mm Length
  • Lathe PartLathe Parting Off Insert
  • Approach Angle90°
  • SeriesLFMX
  • For Use WithXLCFN
  • Length3.1mm
Se liknande produkter Lathe Tool Holders & Inserts
  • RS-artikelnummer
    866-0360
  • Varumärke
    Pramet
  • Tillv. art.nr
    LFMX 3.1-.20SNM2:T8330
Pramet Double Ended Parting and Grooving Insert, 25 mm
  • 2 358,85 kr1 Box of 10
Pramet Double Ended Parting and Grooving Insert, 25 mm
  • TypeDouble Ended Parting and Grooving Insert
  • Lathe PartLathe Parting Off Insert
  • Overall Length25 mm
  • Cutting Length2mm
  • Number of Pieces1
Se liknande produkter Lathe Tools & Kits
Senaste sökningar
FAQ - Vanliga frågor
Behöver du hjälp?
Ring vår kundtjänst på:
0771-45 89 00
Våra tjänster
Om RS
Populära ämnen
kund@rsonline.se
0771-45 89 00
© RS Components AB
Kronborgsgränd 1, 164 46 Kista
Payment options