FTDI Chip FT602Q-B-T, USB Controller, 480Mbps, USB, 3.3 V, 76-Pin QFN

RS-artikelnummer:: 196-6437P
Tillv. art.nr:: FT602Q-B-T
Tillverkare / varumärke:: FTDI Chip

Mängdrabatt möjlig

Antal 10 enheter (levereras på en bricka)*

833,30 kr

(exkl. moms)

1 041,60 kr

(inkl. moms)

GRATIS leverans för online beställningar över 500,00 kr

I lager

124 enhet(er) är redo att levereras

Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"

Enheter	Per enhet
10 - 24	83,33 kr
25 - 49	81,20 kr
50 - 99	79,07 kr
100 +	77,17 kr

*vägledande pris

RS-artikelnummer:: 196-6437P
Tillv. art.nr:: FT602Q-B-T
Tillverkare / varumärke:: FTDI Chip

Specifikationer

Datablad

Lagstiftning och ursprungsland

Produktdetaljer

Hitta liknande produkter genom att välja ett eller flera attribut.

Välj alla	Attribut	Värde
	Brand	FTDI Chip
	Number of Transceivers	1
	Data Rate	480Mbps
	Protocols Supported	USB
	IC Type	Controller IC
	Power Supply Type	Single
	ESD Protection	Yes
	Typical Single Supply Voltage	3.3 V
	Mounting Type	Surface Mount
	Package Type	QFN
	Pin Count	76
	Dimensions	8.85 x 8.85 x 0.95mm
	Height	0.95mm
	Length	8.85mm
	Maximum Operating Temperature	+85 °C
	Width	8.85mm
	Minimum Operating Temperature	-40 °C

	Välj alla
	Brand FTDI Chip
	Number of Transceivers 1
	Data Rate 480Mbps
	Protocols Supported USB
	IC Type Controller IC
	Power Supply Type Single
	ESD Protection Yes
	Typical Single Supply Voltage 3.3 V
	Mounting Type Surface Mount
	Package Type QFN
	Pin Count 76
	Dimensions 8.85 x 8.85 x 0.95mm
	Height 0.95mm
	Length 8.85mm
	Maximum Operating Temperature +85 °C
	Width 8.85mm
	Minimum Operating Temperature -40 °C

Datasheet FT602Q-B-T

Supports USB 3.1 GEN 1 Super Speed (5Gbps) / USB 2.0 High Speed (480Mbps)
Supports USB Transfer Types: Control/Bulk/Interrupt
Supports UVC version 1.1
Supports multi channel FIFO interface
Supports up to 4 video input channels on the FIFO bus
Supports 2 parallel slave FIFO bus protocols, 245 FIFO and Multi-channel FIFO mode, with a data burst rate up to 400MB/s with 32 bit parallel interface
Built-in 16kB FIFO data buffer RAM
Built-in I2C master interface for video device configuration
Supports multi voltage I/O: 1.8V, 2.5V and 3.3V
Internal LDO 1.0V regulator
Integrated power-on-reset circuit
User programmable USB descriptors
Industrial operating temperature range: -40 to 85⁰C
Available in compact Pb-free QFN-76 package.
Applications
USB 3.1 Digital Video Camera Interface
USB 3.1 Digital Camera
Medical/Industrial imaging devices
USB 3.1 Instrumentation