Allegro Microsystems Surface Hall Effect Sensor 3 V 24 V, SOT-23, 3-Pin
- RS-artikelnummer:
- 177-5549
- Tillv. art.nr:
- A1126LLHLT-T
- Tillverkare / varumärke:
- Allegro Microsystems
Antal (1 rulle med 3000 enheter)*
27 429,00 kr
(exkl. moms)
34 287,00 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 08 juli 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per rulle* |
|---|---|---|
| 3000 + | 9,143 kr | 27 429,00 kr |
*vägledande pris
- RS-artikelnummer:
- 177-5549
- Tillv. art.nr:
- A1126LLHLT-T
- Tillverkare / varumärke:
- Allegro Microsystems
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Allegro Microsystems | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Hall Effect Sensors | |
| Technology | Digital | |
| Mount Type | Surface | |
| Magnetic Type | Omnipolar | |
| Minimum Supply Voltage | 3V | |
| Package Type | SOT-23 | |
| Maximum Supply Voltage | 24V | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 150°C | |
| Standards/Approvals | RoHS | |
| Length | 2.98mm | |
| Height | 0.95mm | |
| Width | 1.91 mm | |
| Series | A1126 | |
| Response Time | 25μs | |
| Supply Current | 4mA | |
| Automotive Standard | AEC-Q100 | |
| Välj alla | ||
|---|---|---|
Brand Allegro Microsystems | ||
Product Type Hall Effect Sensor | ||
Sensor Type Hall Effect Sensors | ||
Technology Digital | ||
Mount Type Surface | ||
Magnetic Type Omnipolar | ||
Minimum Supply Voltage 3V | ||
Package Type SOT-23 | ||
Maximum Supply Voltage 24V | ||
Minimum Operating Temperature -40°C | ||
Pin Count 3 | ||
Maximum Operating Temperature 150°C | ||
Standards/Approvals RoHS | ||
Length 2.98mm | ||
Height 0.95mm | ||
Width 1.91 mm | ||
Series A1126 | ||
Response Time 25μs | ||
Supply Current 4mA | ||
Automotive Standard AEC-Q100 | ||
- COO (Country of Origin):
- US
A1126 Chopper Stabilised Omnipolar Hall Effect Sensor Switches, Allegro Microsystems
The Allegro Microsystems A1126 is an omnipolar, ultrasensitive Hall-effect switch with a digital output. They include a voltage regulator, Hall-voltage generator, small-signal amplifier, chopper stabilisation, Schmitt trigger, and a short circuit protected open-drain output.
This device has an integrated regulator permitting operation to 24 V.
They are suitable for operation through extended temperature ranges from -40°C to 150°C.
Activation the A1126 with either a north or a south polarity and without a magnetic field, the output is off. This magnetic polarity independence makes it an excellent replacement for reed switches. It also simplifies manufacturing as it does not require the magnets to be orientated.
The A1126 is rated for operation between the ambient temperatures –40°C to 150°C.
AEC-Q100 automotive qualified
Omnipolar operation
High speed, 4-phase chopper stabilisation
Low switchpoint drift
Superior temperature stability
Insensitive to physical stress
Reverse-battery protection
Robust EMC capability
Robust ESD
Hall Effect Sensors, Allegro MicroSystems
relaterade länkar
- Allegro Microsystems Surface Mount Hall Effect Sensor 3-Pin
- Allegro Microsystems Surface Mount Hall Effect Sensor Switch 3-Pin
- Allegro Microsystems Surface Mount Hall Effect Sensor 5-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor 3-Pin
- Allegro Microsystems Surface Mount Hall Effect Sensor 6-Pin
- Allegro Microsystems Surface Mount Hall Effect Sensor 8-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor Switch 3-Pin
- Allegro Microsystems Surface Mount Hall Effect Sensor 5-Pin