Allegro Microsystems Surface Hall Effect Sensor 3.8 V 24 V, SOT-23, 3-Pin
- RS-artikelnummer:
- 177-5543
- Tillv. art.nr:
- A1101ELHLT-T
- Tillverkare / varumärke:
- Allegro Microsystems
Antal (1 rulle med 3000 enheter)*
26 955,00 kr
(exkl. moms)
33 693,00 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Lagerinformation är för närvarande otillgänglig
Enheter | Per enhet | Per rulle* |
|---|---|---|
| 3000 + | 8,985 kr | 26 955,00 kr |
*vägledande pris
- RS-artikelnummer:
- 177-5543
- Tillv. art.nr:
- A1101ELHLT-T
- Tillverkare / varumärke:
- Allegro Microsystems
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Allegro Microsystems | |
| Sensor Type | Hall Effect Sensors | |
| Product Type | Hall Effect Sensor | |
| Technology | BiCMOS | |
| Mount Type | Surface | |
| Magnetic Type | Unipolar | |
| Minimum Supply Voltage | 3.8V | |
| Package Type | SOT-23 | |
| Maximum Supply Voltage | 24V | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 3 | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | No | |
| Length | 2.98mm | |
| Height | 0.95mm | |
| Width | 1.91 mm | |
| Series | A1101 | |
| Response Time | 4μs | |
| Supply Current | 7.5mA | |
| Automotive Standard | AEC-Q100 | |
| Välj alla | ||
|---|---|---|
Brand Allegro Microsystems | ||
Sensor Type Hall Effect Sensors | ||
Product Type Hall Effect Sensor | ||
Technology BiCMOS | ||
Mount Type Surface | ||
Magnetic Type Unipolar | ||
Minimum Supply Voltage 3.8V | ||
Package Type SOT-23 | ||
Maximum Supply Voltage 24V | ||
Minimum Operating Temperature -40°C | ||
Pin Count 3 | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals No | ||
Length 2.98mm | ||
Height 0.95mm | ||
Width 1.91 mm | ||
Series A1101 | ||
Response Time 4μs | ||
Supply Current 7.5mA | ||
Automotive Standard AEC-Q100 | ||
- COO (Country of Origin):
- PH
A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems
The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.
Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress.
The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor.
The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels.
Continuous-time operation with fast power-on time and low noise
Stable operation over full operating temperature range
Reverse battery protection
Solid-state reliability
Factory-programmed at end of line for optimum performance
Robust EMC performance
High ESD rating
Regulator stability without a bypass capacitor
Hall Effect Sensors, Allegro MicroSystems
relaterade länkar
- Allegro Microsystems Surface Hall Effect Sensor 3.8 V 24 V 3-Pin
- Allegro Microsystems 1-Axis Surface Hall Effect Sensor 3.8 V 24 V 3-Pin
- Allegro Microsystems Through Hole Hall Effect Sensor 3.8 V 24 V 3-Pin
- Allegro Microsystems Surface Hall Effect Sensor 2.4 V 5.5 V 3-Pin
- Allegro Microsystems Surface Hall Effect Sensor 2.5 V 3.5 V 3-Pin
- Allegro Microsystems Surface Hall Effect Sensor 4.5 V 5.5 V 3-Pin
- Allegro Microsystems Surface Hall Effect Sensor 3 V 24 V 3-Pin
- Allegro Microsystems 1-Axis Through Hole Hall Effect Sensor 3.8 V 24 V 3-Pin