Allegro Microsystems Surface Hall Effect Sensor 4.5 V 5.5 V, SOT-23, 3-Pin

RS-artikelnummer:: 172-9260
Tillv. art.nr:: A1326LLHLT-T
Tillverkare / varumärke:: Allegro Microsystems

Allegro Microsystems Surface Hall Effect Sensor 4.5 V 5.5 V, SOT-23, 3-Pin

Antal (1 rulle med 3000 enheter)*

42 600,00 kr

(exkl. moms)

53 250,00 kr

(inkl. moms)

GRATIS leverans för online beställningar över 500,00 kr

Tillfälligt slut

Leverans från den 11 maj 2026

Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"

Enheter	Per enhet	Per rulle*
3000 +	14,20 kr	42 600,00 kr

*vägledande pris

RS-artikelnummer:: 172-9260
Tillv. art.nr:: A1326LLHLT-T
Tillverkare / varumärke:: Allegro Microsystems

Specifikationer

Datablad

Lagstiftning och ursprungsland

Produktdetaljer

Hitta liknande produkter genom att välja ett eller flera attribut.

Välj alla	Attribut	Värde
	Brand	Allegro Microsystems
	Sensor Type	Hall Effect Sensors
	Product Type	Hall Effect Sensor
	Technology	BiCMOS Chopper Stabilised
	Mount Type	Surface
	Magnetic Type	Linear
	Maximum Frequency Response	17kHz
	Minimum Supply Voltage	4.5V
	Package Type	SOT-23
	Maximum Supply Voltage	5.5V
	Minimum Operating Temperature	-40°C
	Sensitivity	2.5mV/g
	Maximum Operating Temperature	150°C
	Pin Count	3
	Series	A132
	Height	0.95mm
	Length	2.98mm
	Standards/Approvals	Pb Free
	Width	1.91 mm
	Supply Current	9mA
	Automotive Standard	No
	Response Time	32μs

	Välj alla
	Brand Allegro Microsystems
	Sensor Type Hall Effect Sensors
	Product Type Hall Effect Sensor
	Technology BiCMOS Chopper Stabilised
	Mount Type Surface
	Magnetic Type Linear
	Maximum Frequency Response 17kHz
	Minimum Supply Voltage 4.5V
	Package Type SOT-23
	Maximum Supply Voltage 5.5V
	Minimum Operating Temperature -40°C
	Sensitivity 2.5mV/g
	Maximum Operating Temperature 150°C
	Pin Count 3
	Series A132
	Height 0.95mm
	Length 2.98mm
	Standards/Approvals Pb Free
	Width 1.91 mm
	Supply Current 9mA
	Automotive Standard No
	Response Time 32μs

Datasheet

A1324/5/6 Linear Hall Effect Sensor with Analogue Output, Allegra Microsystems

The Allegro A1324/5/6 linear Hall-effect sensor ICs provide a voltage output that is proportional to the applied magnetic field. Featuring a quiescent voltage output of 50% of the supply voltage and are pre-programmed to sensitivities of 5.0 mV/g, 3.125 mV/g, and 2.5 mV/g, respectively.

Each IC integrates a Hall element, temperature-compensating circuitry, a small-signal high-gain amplifier, a clamped low-impedance output stage, and a proprietary dynamic offset cancellation technique.

Available in a 3-pin ultra-mini SIP package, and a 3-pin surface mount SOT-23 package.

Temperature-stable quiescent output voltage and sensitivity

Output voltage proportional to magnetic flux density

Low-noise output increases accuracy

Precise recoverability after temperature cycling

Ratiometric rail-to-rail output

Wide ambient temperature range: –40°C to 150°C

Immune to mechanical stress

Solid-state reliability

Enhanced EMC performance for stringent automotive applications

Allegro Microsystems Surface Hall Effect Sensor 4.5 V 5.5 V, SOT-23, 3-Pin

GRATIS leverans för online beställningar över 500,00 kr

A1324/5/6 Linear Hall Effect Sensor with Analogue Output, Allegra Microsystems

Hall Effect Sensors, Allegro MicroSystems

relaterade länkar