Allegro Microsystems 1-Axis Surface Hall Effect Sensor 3.8 V 24 V, SOT-23, 3-Pin

RS-artikelnummer:: 680-7100
Tillv. art.nr:: A1102ELHLT-T
Tillverkare / varumärke:: Allegro Microsystems

Allegro Microsystems 1-Axis Surface Hall Effect Sensor 3.8 V 24 V, SOT-23, 3-Pin

Mängdrabatt möjlig

Antal (1 förpackning med 5 enheter)*

58,58 kr

(exkl. moms)

73,225 kr

(inkl. moms)

GRATIS leverans för online beställningar över 500,00 kr

I lager

Dessutom levereras 220 enhet(er) från den 19 januari 2026

Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"

Enheter	Per enhet	Per förpackning*
5 - 20	11,716 kr	58,58 kr
25 - 95	11,424 kr	57,12 kr
100 - 245	11,066 kr	55,33 kr
250 - 495	10,842 kr	54,21 kr
500 +	10,596 kr	52,98 kr

*vägledande pris

RS-artikelnummer:: 680-7100
Tillv. art.nr:: A1102ELHLT-T
Tillverkare / varumärke:: Allegro Microsystems

Specifikationer

Datablad

Lagstiftning och ursprungsland

Produktdetaljer

Hitta liknande produkter genom att välja ett eller flera attribut.

Välj alla	Attribut	Värde
	Brand	Allegro Microsystems
	Sensor Type	Hall Effect Sensors
	Product Type	Hall Effect Sensor
	Number of Axis	1
	Technology	BiCMOS
	Mount Type	Surface
	Magnetic Type	Unipolar
	Minimum Supply Voltage	3.8V
	Package Type	SOT-23
	Maximum Supply Voltage	24V
	Minimum Operating Temperature	-40°C
	Pin Count	3
	Maximum Operating Temperature	85°C
	Series	A1102
	Length	2.98mm
	Standards/Approvals	No
	Height	0.95mm
	Width	1.91 mm
	Supply Current	4.1mA
	Response Time	4μs
	Automotive Standard	AEC-Q100

	Välj alla
	Brand Allegro Microsystems
	Sensor Type Hall Effect Sensors
	Product Type Hall Effect Sensor
	Number of Axis 1
	Technology BiCMOS
	Mount Type Surface
	Magnetic Type Unipolar
	Minimum Supply Voltage 3.8V
	Package Type SOT-23
	Maximum Supply Voltage 24V
	Minimum Operating Temperature -40°C
	Pin Count 3
	Maximum Operating Temperature 85°C
	Series A1102
	Length 2.98mm
	Standards/Approvals No
	Height 0.95mm
	Width 1.91 mm
	Supply Current 4.1mA
	Response Time 4μs
	Automotive Standard AEC-Q100

Datasheet

COO (Country of Origin):: PH

A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems

The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.

Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress.

The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor.

The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels.

Continuous-time operation with fast power-on time and low noise

Stable operation over full operating temperature range

Reverse battery protection

Solid-state reliability

Factory-programmed at end of line for optimum performance

Robust EMC performance

High ESD rating

Regulator stability without a bypass capacitor

Allegro Microsystems 1-Axis Surface Hall Effect Sensor 3.8 V 24 V, SOT-23, 3-Pin

GRATIS leverans för online beställningar över 500,00 kr

A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems

Hall Effect Sensors, Allegro MicroSystems

relaterade länkar