Splice Connectors

A splice connector consists of a plastic clip that has a sharp metal insert that will safely cut through the plastic insulating jackets of two wires and crimps them together. Splice Connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level.


Types of splice connectors:


  • Crimp Butt Splice Terminal

  • Crimp Closed End Terminal

  • Crimp Barrel Foil Terminal

  • Push Wire Terminal

 


Frequently asked Questions


What are Crimp Butt Splice Terminals


Crimp butt splice terminals are tube-shaped connectors with two crimps for joining wires in-line. They typically consist of a metal tube that's usually encased in an insulated covering. Crimp butt splice terminals can be used to either change, lengthen or repair conductors in an electrical circuit.


How Do Crimp Butt Splice Terminals Work ?


Crimp butt splice terminals are attached by inserting the stripped ends of two stranded wires into both ends of the terminal. A crimping tool is then used to crimp both ends to ensure a tight connection between the wires.


What are Crimp Closed-End Connectors used for?


Crimp closed-end connectors are used to terminate wires as well as seal them from oxygen and moisture, which would otherwise cause corrosion. Terminators in electronic transmission lines prevent reflections that would occur at unterminated transmission lines, which can lead to distortions like video ghosting in analogue signal systems.


Crimp closed-end connectors come in a wide range of fixed sizes for wires of different diameters. There also are adjustable ones that provide more flexibility.


...
Read more Read less

Filter

Visar 61 - 80 av 586 produkter
Resultat per sida
Beskrivning Pris Splice Type Minimum Wire Size mm² Wire Size Maximum Wire Size mm² Overall Length Diameter Minimum Wire Size AWG Insulation Maximum Wire Size AWG Number of Ways Colour Contact Dimensions Insulation Material Contact Length
RS-artikelnummer 267-4007
VarumärkeRS PRO
7,467 kr
Each (In a Pack of 100)
Enheter
Butt 4mm² 12 → 10 AWG 6mm² 41mm 6.2mm 12AWG Insulated 10AWG - Yellow - Nylon -
RS-artikelnummer 510-4898
VarumärkeRS PRO
33,24 kr
1 Bag of 50
Påse(ar)
Tap 0.5mm² 20 → 18 AWG 0.75mm² 34mm 35mm 20AWG Insulated 16AWG - Red - Nylon -
RS-artikelnummer 178-7200
VarumärkeRS PRO
0,817 kr
Each (In a Bag of 100)
Enheter
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 16mm 3.9mm 16AWG Uninsulated 14AWG - - - - -
RS-artikelnummer 178-7254
VarumärkeRS PRO
1,678 kr
Each (In a Bag of 100)
Enheter
- - 8 AWG, 10 mm² 10mm² 10mm 8mm - Uninsulated 8AWG - - - - -
RS-artikelnummer 613-9772
VarumärkeRS PRO
1,221 kr
Each (In a Pack of 100)
Enheter
Parallel 0.5mm² 22 → 16 AWG 1.5mm² 16.5mm 4mm 22AWG Insulated 16AWG - Red - Vinyl -
RS-artikelnummer 178-7227
VarumärkeRS PRO
1,301 kr
Each (In a Bag of 100)
Enheter
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 26.5mm 6.3mm 12AWG Insulated 10AWG - Yellow - Vinyl -
RS-artikelnummer 510-4860
VarumärkeRS PRO
49,53 kr
1 Bag of 50
Påse(ar)
Tap 1.5mm² 16 → 14 AWG 2.5mm² 49mm 20mm 16AWG Insulated 14AWG - Blue, Red - Nylon -
RS-artikelnummer 809-2385
VarumärkeRS PRO
4,645 kr
Each (In a Pack of 50)
Enheter
Butt - 8 AWG 8mm² 21mm 7mm - Uninsulated 8AWG - - - - -
RS-artikelnummer 841-7683
VarumärkeRS PRO
5,003 kr
Each (In a Pack of 50)
Enheter
Butt - 50 mm² - 40mm 12.4mm - Uninsulated - - - - - -
RS-artikelnummer 178-8398
VarumärkeRS PRO
0,85 kr
Each (In a Bag of 100)
Enheter
- - 5.5 mm², 12 → 10 AWG 5.5mm² 17.8mm 9.2mm 12AWG Insulated 10AWG - Natural - Nylon -
RS-artikelnummer 178-7224
VarumärkeRS PRO
0,527 kr
Each (In a Bag of 100)
Enheter
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 24.6mm 4mm 22AWG Insulated 16AWG - Red - Vinyl -
RS-artikelnummer 819-9883
VarumärkeRS PRO
6,928 kr
Each (In a Bag of 10)
Enheter
- - - - - - - - - - - - - -
RS-artikelnummer 178-7211
VarumärkeRS PRO
1,828 kr
Each (In a Bag of 100)
Enheter
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 26mm 4.5mm 22AWG Insulated 16AWG - Red - Nylon -
RS-artikelnummer 119-227
VarumärkeRS PRO
6,99 kr
Each (In a Pack of 10)
Enheter
Butt - 35 mm² 35mm² 35mm 8.6mm - Uninsulated - - - - - -
RS-artikelnummer 458-0724
VarumärkeRS PRO
8,578 kr
Each (In a Bag of 10)
Enheter
- - - - - - - Insulated - - - - - -
RS-artikelnummer 809-2363
VarumärkeRS PRO
0,635 kr
Each (In a Pack of 100)
Enheter
Butt 0.5mm² 22 → 16 AWG 1.5mm² 15mm 3.3mm 22AWG Uninsulated 16AWG - - - - -
RS-artikelnummer 178-7218
VarumärkeRS PRO
1,925 kr
Each (In a Bag of 100)
Enheter
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 27.3mm 5.3mm 12AWG Insulated 10AWG - Yellow - Nylon -
RS-artikelnummer 178-7201
VarumärkeRS PRO
1,549 kr
Each (In a Bag of 100)
Enheter
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 21mm 5.4mm 12AWG Uninsulated 10AWG - - - - -
RS-artikelnummer 534-907
VarumärkeRS PRO
1,139 kr
Each (In a Pack of 100)
Enheter
Closed End 0.5mm² 0.5 → 1.5 mm² 1.5mm² 18.1mm 6.6mm 22AWG Insulated 16AWG - Clear - Nylon -
RS-artikelnummer 510-4810
VarumärkeRS PRO
16,65 kr
1 Bag of 50
Påse(ar)
Tap 0.5mm² 20 → 18 AWG 0.75mm² 27mm 20mm 22AWG Insulated 18AWG - Red - PP -
Related Products
From RS PRO, a selection of insulated ferrules ...
Description:
From RS PRO, a selection of insulated ferrules or Butt Connectors designed for crimping electrical wires. The tube-shaped terminals act as a solderless cable joint allowing electrical current to flow safely from one wire to another. Professionally designed using high-quality ...
ELECTRO-TAP splices offer an economic method of joining ...
Description:
ELECTRO-TAP splices offer an economic method of joining branch or tap wire to solid or stranded for wire ranges 0.5mm - 6.0mm² using insulation displacement self-stripping contacts. These ELECTRO-TAP splice connectors have colour coded nylon housings which double lock when ...
MiniSeal high performance immersion-resistant crimp splices designed to ...
Description:
MiniSeal high performance immersion-resistant crimp splices designed to provide long-term performance and excellent reliability in challenging environments. These MiniSeal splices have a lightweight, low profile design for use in applications where the need for space saving and environmental sealing is ...
TE heat shrinkable pre-insulated nylon splices and crimp ...
Description:
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion ...