Splice Connectors

A splice connector consists of a plastic clip that has a sharp metal insert that will safely cut through the plastic insulating jackets of two wires and crimps them together. Splice Connectors are used to make quick splices or connections with two or more pieces of wire. These splices are normally crimped or soldered so that the power conducted from the source cable to the next cable is transferred at inacceptable conductivity and pull-out resistance performance level.


Types of splice connectors:


  • Crimp Butt Splice Terminal

  • Crimp Closed End Terminal

  • Crimp Barrel Foil Terminal

  • Push Wire Terminal

 


Frequently asked Questions


What are Crimp Butt Splice Terminals


Crimp butt splice terminals are tube-shaped connectors with two crimps for joining wires in-line. They typically consist of a metal tube that's usually encased in an insulated covering. Crimp butt splice terminals can be used to either change, lengthen or repair conductors in an electrical circuit.


How Do Crimp Butt Splice Terminals Work ?


Crimp butt splice terminals are attached by inserting the stripped ends of two stranded wires into both ends of the terminal. A crimping tool is then used to crimp both ends to ensure a tight connection between the wires.


What are Crimp Closed-End Connectors used for?


Crimp closed-end connectors are used to terminate wires as well as seal them from oxygen and moisture, which would otherwise cause corrosion. Terminators in electronic transmission lines prevent reflections that would occur at unterminated transmission lines, which can lead to distortions like video ghosting in analogue signal systems.


Crimp closed-end connectors come in a wide range of fixed sizes for wires of different diameters. There also are adjustable ones that provide more flexibility.


...
Read more Read less

Filter

Visar 41 - 60 av 586 produkter
Resultat per sida
Beskrivning Pris Splice Type Minimum Wire Size mm² Wire Size Maximum Wire Size mm² Overall Length Diameter Minimum Wire Size AWG Insulation Maximum Wire Size AWG Number of Ways Colour Contact Dimensions Insulation Material Contact Length
RS-artikelnummer 178-7202
VarumärkeRS PRO
1,00 kr
Each (In a Bag of 100)
Enheter
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 25mm 4mm 22AWG Insulated 16AWG - Red - PC -
RS-artikelnummer 178-7181
VarumärkeRS PRO
0,903 kr
Each (In a Bag of 50)
Enheter
- 0.5mm² 0.5 → 0.75 mm², 22 → 18 AWG 0.75mm² 27mm - 22AWG Insulated 18AWG - Red - PP -
RS-artikelnummer 178-7198
VarumärkeRS PRO
0,516 kr
Each (In a Bag of 100)
Enheter
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 15mm 3.3mm 22AWG Uninsulated 16AWG - - - - -
RS-artikelnummer 178-7183
VarumärkeRS PRO
1,075 kr
Each (In a Bag of 50)
Enheter
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 49mm - 16AWG Insulated 14AWG - Red - PP -
RS-artikelnummer 178-7215
VarumärkeRS PRO
0,925 kr
Each (In a Bag of 100)
Enheter
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 25.2mm 4.5mm 16AWG Insulated 14AWG - Blue - Nylon -
RS-artikelnummer 178-7206
VarumärkeRS PRO
1,452 kr
Each (In a Bag of 100)
Enheter
- 4mm² 12 → 10 AWG, 4 → 6 mm² 6mm² 27.3mm 5.3mm 12AWG Insulated 10AWG - Yellow - Nylon -
RS-artikelnummer 809-2375
VarumärkeRS PRO
0,685 kr
Each (In a Pack of 100)
Enheter
Butt 1.5mm² 16 → 14 AWG 2.5mm² 16mm 3.9mm 16AWG Uninsulated 14AWG - - - - -
RS-artikelnummer 510-4775
VarumärkeRS PRO
223,55 kr
1 Bag of 100
Påse(ar)
Butt - 26 → 22 AWG - 12.5mm 7.9mm 26AWG Insulated 22AWG - White, Yellow - - -
RS-artikelnummer 178-7235
VarumärkeRS PRO
0,344 kr
Each (In a Bag of 100)
Enheter
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 21mm 8mm 16AWG Insulated 14AWG - Natural - Nylon -
RS-artikelnummer 178-7233
VarumärkeRS PRO
0,312 kr
Each (In a Bag of 100)
Enheter
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 21mm 8mm 22AWG Insulated 16AWG - Natural - Nylon -
RS-artikelnummer 178-7212
VarumärkeRS PRO
1,667 kr
Each (In a Bag of 100)
Enheter
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 27mm 5.2mm 16AWG Insulated 14AWG - Blue - Nylon -
RS-artikelnummer 178-7184
VarumärkeRS PRO
7,226 kr
Each (In a Bag of 50)
Enheter
- 0.5mm² 0.5 → 1.5 mm², 22 → 16 AWG 1.5mm² 36mm 1.7mm 22AWG Insulated 16AWG - Red - Nylon -
RS-artikelnummer 178-7226
VarumärkeRS PRO
0,635 kr
Each (In a Bag of 100)
Enheter
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 24.6mm 4.5mm 16AWG Insulated 14AWG - Blue - Vinyl -
RS-artikelnummer 613-9788
VarumärkeRS PRO
1,14 kr
Each (In a Pack of 100)
Enheter
Butt 1.5mm² 16 → 14 AWG 2.5mm² 24.2mm 4.5mm 16AWG Insulated 14AWG - Blue - Vinyl -
RS-artikelnummer 178-7213
VarumärkeRS PRO
2,14 kr
Each (In a Bag of 100)
Enheter
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 27mm 5.2mm 16AWG Insulated 14AWG - Blue - Nylon -
RS-artikelnummer 510-4826
VarumärkeRS PRO
28,98 kr
1 Bag of 50
Påse(ar)
Tap 4mm² 12 → 10 AWG 6mm² 34.5mm 20.5mm 12AWG Insulated 10AWG - Yellow - PP -
RS-artikelnummer 178-7205
VarumärkeRS PRO
0,817 kr
Each (In a Bag of 100)
Enheter
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 27.3mm 3.8mm 16AWG Insulated 14AWG - Blue - Nylon -
RS-artikelnummer 178-7185
VarumärkeRS PRO
8,538 kr
Each (In a Bag of 50)
Enheter
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 36mm 2.3mm 16AWG Insulated 14AWG - Blue - Nylon -
RS-artikelnummer 178-7200
VarumärkeRS PRO
0,817 kr
Each (In a Bag of 100)
Enheter
- 1.5mm² 1.5 → 2.5 mm², 16 → 14 AWG 2.5mm² 16mm 3.9mm 16AWG Uninsulated 14AWG - - - - -
RS-artikelnummer 267-4013
VarumärkeRS PRO
1,167 kr
Each (In a Pack of 100)
Enheter
Butt 1.5mm² 16 → 14 AWG 2.5mm² 31mm 4.6mm 16AWG Insulated 14AWG - Blue - Nylon -
Related Products
From RS PRO, a selection of insulated ferrules ...
Description:
From RS PRO, a selection of insulated ferrules or Butt Connectors designed for crimping electrical wires. The tube-shaped terminals act as a solderless cable joint allowing electrical current to flow safely from one wire to another. Professionally designed using high-quality ...
ELECTRO-TAP splices offer an economic method of joining ...
Description:
ELECTRO-TAP splices offer an economic method of joining branch or tap wire to solid or stranded for wire ranges 0.5mm - 6.0mm² using insulation displacement self-stripping contacts. These ELECTRO-TAP splice connectors have colour coded nylon housings which double lock when ...
MiniSeal high performance immersion-resistant crimp splices designed to ...
Description:
MiniSeal high performance immersion-resistant crimp splices designed to provide long-term performance and excellent reliability in challenging environments. These MiniSeal splices have a lightweight, low profile design for use in applications where the need for space saving and environmental sealing is ...
TE heat shrinkable pre-insulated nylon splices and crimp ...
Description:
TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion ...