FTDI Chip FT232HPQ-TRAY, Controller IC, 1-Channel 12 Mbps, 1.32 V, USB 2.0, 3.3 V, 56-Pin QFN

RS-artikelnummer:: 228-3123
Tillv. art.nr:: FT232HPQ-TRAY
Tillverkare / varumärke:: FTDI Chip

FTDI Chip FT232HPQ-TRAY, Controller IC, 1-Channel 12 Mbps, 1.32 V, USB 2.0, 3.3 V, 56-Pin QFN

Mängdrabatt möjlig

Antal (1 enhet)*

52,03 kr

(exkl. moms)

65,04 kr

(inkl. moms)

GRATIS leverans för online beställningar över 500,00 kr

I lager

Dessutom levereras 679 enhet(er) från den 16 januari 2026

Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"

Enheter	Per enhet
1 - 9	52,03 kr
10 - 99	50,74 kr
100 +	49,39 kr

*vägledande pris

RS-artikelnummer:: 228-3123
Tillv. art.nr:: FT232HPQ-TRAY
Tillverkare / varumärke:: FTDI Chip

Specifikationer

Datablad

Lagstiftning och ursprungsland

Produktdetaljer

Hitta liknande produkter genom att välja ett eller flera attribut.

Välj alla	Attribut	Värde
	Brand	FTDI Chip
	Number of Transceivers	1
	Maximum Data Rate	12Mbps
	Product Type	Controller IC
	Sub Type	Controller
	USB Specification	USB Type C
	Power Supply Type	Single
	ESD Protection	Yes
	Maximum Supply Voltage	1.32V
	Minimum Supply Voltage	3.3V
	Mount Type	Surface
	Package Type	QFN
	Pin Count	56
	Minimum Operating Temperature	-40°C
	Supported Protocols	USB 2.0
	Maximum Operating Temperature	85°C
	Length	8mm
	Height	0.9mm
	Series	FT232HP
	Width	8 mm
	Standards/Approvals	No
	Automotive Standard	No

	Välj alla
	Brand FTDI Chip
	Number of Transceivers 1
	Maximum Data Rate 12Mbps
	Product Type Controller IC
	Sub Type Controller
	USB Specification USB Type C
	Power Supply Type Single
	ESD Protection Yes
	Maximum Supply Voltage 1.32V
	Minimum Supply Voltage 3.3V
	Mount Type Surface
	Package Type QFN
	Pin Count 56
	Minimum Operating Temperature -40°C
	Supported Protocols USB 2.0
	Maximum Operating Temperature 85°C
	Length 8mm
	Height 0.9mm
	Series FT232HP
	Width 8 mm
	Standards/Approvals No
	Automotive Standard No

The FTDI Chip FT233HP/FT232HP is a Hi-Speed USB device with Type-C/PD 3.0 controller IC that fully supports the latest USB Type-C and Power Delivery (PD) standards enabling support for power negotiation with the ability to sink or source current to a USB host device. The USB bridge function delivers 1 independent channel compatible with the FT232H – Single Hi-speed USB to multipurpose UART/FIFO solution.

Supports PD Specification 3.0.

1 x USB PD 3.0 Port supports Dual Role Swap Function

Supports 5V3A, 9V3A, 12V3A, 15V3A, 20V3A and more PDOs as sink or source.

Type-C/PD Physical Layer Protocol.

PD policy engine using 32-bit RISC controller with 8kB data RAM and 48kB code ROM.

PD mode configuration through external EEPROM.

Options to use external MCU controlling PD policy through I2C interface.

Up to 8 Configurable PD GPIO pins support.

External MCU support through I2C bus.

FTDI Chip FT232HPQ-TRAY, Controller IC, 1-Channel 12 Mbps, 1.32 V, USB 2.0, 3.3 V, 56-Pin QFN

GRATIS leverans för online beställningar över 500,00 kr

relaterade länkar