Siemens 3RF2 Series Solid State Relay, 20 A Load, DIN Rail Mount, 230 V Load, 24 V dc Control

Se alla Solid State Relays

Antal (1 enhet)*

917,62 kr

(exkl. moms)

1 147,02 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • 12 enhet(er) är redo att levereras från en annan plats
  • Dessutom levereras 13 enhet(er) från den 23 januari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 +917,62 kr

*vägledande pris

RS-artikelnummer:
467-4762
Tillv. art.nr:
3RF2320-1AA02
Tillverkare / varumärke:
Siemens
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Siemens

Maximum Load Current

20 A

Mounting Type

DIN Rail

Maximum Load Voltage

230 V

Minimum Load Voltage

24 V

Minimum Control Voltage

15 V dc

Maximum Control Voltage

24 V dc

Switching Type

Zero Cross

Control Voltage Range

15 → 24 V dc

Range

SIRIUS 3RF

Minimum Load Current

0.5 A

Number of Poles

1

Contact Configuration

SPST

Terminal Type

Screw

Output Device

Thyristor

Relay Type

Solid State Relay

Load Voltage Range

24 → 230V

Maximum Turn On Time

1/2 cycle

Series

3RF2

Dimensions

22.5 x 140.5 x 100mm

Depth

140.5mm

Standards Met

EAC

Maximum Operating Temperature

+60°C

Operating Temperature Range

-25 → +60°C

Off State Leakage Current

10 mA

Height

100mm

Minimum Operating Temperature

-25°C

RoHS-status: Undantagen

COO (Country of Origin):
DE

Contactor - 3RF23 Range


Single phase currents up to 50A AC can be switched
2 voltage ranges available both with 24Vdc control voltage
Isolation voltage; 600Vac
Blocking voltage 800Vac (24-230Vac version), 1200Vac (48-460Vac version)
LED status indicator
Zero point switching for resistive loads
Switching currents rated at 40°C
IP20 rating
Screw terminals

Siemens Solid State Relay, Zero-Cross Switching Type, 20A Current Rating - SIRIUS Classic Series - 3RF2320-1AA02


Power up your circuit in a flash using this solid-state relay from Siemens. It changes an electrical signal to an optical one before sending it to the circuit, meaning it works without any moving contacts. This means there's minimal risk of wear and you get long-lasting performance. The unit uses zero-cross switching, so it turns on when the load voltage is close to zero to minimise noise. Mount it in a snap by simply clipping it to your DIN rail. You can use this device to control your robotics and instrumentation systems.

• IP20 rating means it's finger-safe and protected against objects larger than 12mm
• Broad operating temperature range between -25°C and +60°C for use in challenging environments
• Compact dimensions of 100 (H) x 22.5 (W) x 140.5mm (D) to add minimal bulk to your rail
• Screw terminals for a secure, vibration-proof connection without the need for special tools

What's the current rating of this SSR?


This relay has a current rating of 20A, so it's a safe bet for use with heavy-duty equipment.


Zero Voltage Relays

Note

Temperature can affect current rating; please consult the data sheet for potential derating.

relaterade länkar

Recently viewed