STMicroelectronics Demonstration Board Power Supply for VIPER26 for Switched Mode Power Supply
- RS-artikelnummer:
- 196-1838
- Tillv. art.nr:
- STEVAL-ISA081V1
- Tillverkare / varumärke:
- STMicroelectronics
Antal (1 enhet)*
541,72 kr
(exkl. moms)
677,15 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Försörjningsbrist
- Dessutom levereras 2 enhet(er) från den 08 december 2025
Vårt nuvarande lager är begränsat och våra leverantörer förväntar sig brist.
Enheter | Per enhet |
|---|---|
| 1 + | 541,72 kr |
*vägledande pris
- RS-artikelnummer:
- 196-1838
- Tillv. art.nr:
- STEVAL-ISA081V1
- Tillverkare / varumärke:
- STMicroelectronics
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | STMicroelectronics | |
| Power Management Function | Power Supply | |
| For Use With | Switched Mode Power Supply | |
| Kit Classification | Evaluation Board | |
| Featured Device | VIPER26 | |
| Kit Name | Demonstration Board | |
| Välj alla | ||
|---|---|---|
Brand STMicroelectronics | ||
Power Management Function Power Supply | ||
For Use With Switched Mode Power Supply | ||
Kit Classification Evaluation Board | ||
Featured Device VIPER26 | ||
Kit Name Demonstration Board | ||
- COO (Country of Origin):
- IT
The STEVAL-ISA081V1 demonstration board is a switched mode power supply (SMPS) demonstration board and it is an isolated SMPS capable of delivering a 12 W output over a wide input voltage range. It is designed for a mains application focusing on cost and size effective solutions.
The STEVAL-ISA081V1 SMPS generates 12 V nominal output voltage using primary regulation and it is based on the VIPER26 monolithic converter, integrating a high voltage MOSFET and PWM controller in one package.
The STEVAL-ISA081V1 SMPS generates 12 V nominal output voltage using primary regulation and it is based on the VIPER26 monolithic converter, integrating a high voltage MOSFET and PWM controller in one package.
Vin: 85 ∼ 305 Vrms / f: 45 ∼ 66 Hz
Vout1: 12 VDC ± 10 %, 1 A (at 3.3 V not loaded)
Vout2: 3.3 VDC ± 4 %, 100 mA
Maximum total output current: 1 A
Standby < 120 mW at 230 VAC
Short-circuit: protected
PCB type and size: FR4, single-side 35 μm, 32 x 90 mm
Isolation: isolated 4 kV / 8 mm
Vout1: 12 VDC ± 10 %, 1 A (at 3.3 V not loaded)
Vout2: 3.3 VDC ± 4 %, 100 mA
Maximum total output current: 1 A
Standby < 120 mW at 230 VAC
Short-circuit: protected
PCB type and size: FR4, single-side 35 μm, 32 x 90 mm
Isolation: isolated 4 kV / 8 mm
relaterade länkar
- STMicroelectronics Demonstration Board Power Supply for Viper06 for Switched Mode Power Supply
- STMicroelectronics Evaluation Board for STBB2 for Switched Mode Power Supply
- STMicroelectronics Demonstration Board for VIPer06XN for Power Supply
- STMicroelectronics Demonstration Board Power Supply for L7985A for Step-Down Switching Power Supply
- STMicroelectronics Demonstration Board Power Supply for L7981 for Step-Down Switching Power Supply
- STMicroelectronics Demonstration Board Buck Converter for VIPer06XS for Power Supply
- STMicroelectronics Demonstration Board for VIPER16 for Non-Isolated Auxiliary Power Supply
- STMicroelectronics Demonstration Board for ST7580 for Power Line Applications
