STMicroelectronics Demonstration Board Power Supply for L7985A for Step-Down Switching Power Supply
- RS-artikelnummer:
- 196-1844
- Tillv. art.nr:
- STEVAL-ISA098V1
- Tillverkare / varumärke:
- STMicroelectronics
Mängdrabatt möjlig
Antal (1 enhet)*
244,07 kr
(exkl. moms)
305,09 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Försörjningsbrist
- Dessutom levereras 6 enhet(er) från den 08 december 2025
Vårt nuvarande lager är begränsat och våra leverantörer förväntar sig brist.
Enheter | Per enhet |
|---|---|
| 1 - 4 | 244,07 kr |
| 5 - 9 | 237,72 kr |
| 10 + | 231,87 kr |
*vägledande pris
- RS-artikelnummer:
- 196-1844
- Tillv. art.nr:
- STEVAL-ISA098V1
- Tillverkare / varumärke:
- STMicroelectronics
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | STMicroelectronics | |
| Power Management Function | Power Supply | |
| For Use With | Step-Down Switching Power Supply | |
| Kit Classification | Evaluation Board | |
| Featured Device | L7985A | |
| Kit Name | Demonstration Board | |
| Välj alla | ||
|---|---|---|
Brand STMicroelectronics | ||
Power Management Function Power Supply | ||
For Use With Step-Down Switching Power Supply | ||
Kit Classification Evaluation Board | ||
Featured Device L7985A | ||
Kit Name Demonstration Board | ||
- COO (Country of Origin):
- IT
The STEVAL-ISA098V1 demonstration board is a step-down switching power supply based on the L7985A in HSOP8 package. The L7985A is a step-down regulator with a 2.5 A (minimum) current limited embedded power MOSFET, so it is able to deliver up to 2 A current to the load depending on the application conditions.
The input voltage can range from 4.5 V to 38 V, while the output voltage can be set starting from 0.6 V to VIN.
Requiring a minimum set of external components, the device includes an internal 250 kHz switching frequency oscillator that can be externally adjusted up to 1 Mhz.
The input voltage can range from 4.5 V to 38 V, while the output voltage can be set starting from 0.6 V to VIN.
Requiring a minimum set of external components, the device includes an internal 250 kHz switching frequency oscillator that can be externally adjusted up to 1 Mhz.
2 A DC output current
From 4.5 V to 38 V range input voltage
Output voltage adjustable from 0.6 V
250 kHz switching frequency programmable up to 1 MHz
Internal soft-start and enable
Low dropout operation: 100% duty cycle
Voltage feed-forward
Zero load current operation
Overcurrent and thermal protection
From 4.5 V to 38 V range input voltage
Output voltage adjustable from 0.6 V
250 kHz switching frequency programmable up to 1 MHz
Internal soft-start and enable
Low dropout operation: 100% duty cycle
Voltage feed-forward
Zero load current operation
Overcurrent and thermal protection
relaterade länkar
- STMicroelectronics Demonstration Board Power Supply for L7981 for Step-Down Switching Power Supply
- STMicroelectronics Demonstration Board for L7980 for Step-Down Switching Regulator
- STMicroelectronics Demonstration Board for L5973D for Step-Down Switching Regulator
- STMicroelectronics Demonstration Board for ST1S40 for PWM Synchronous Step-Down Regulator
- STMicroelectronics Demonstration Board Power Supply for Viper06 for Switched Mode Power Supply
- STMicroelectronics Demonstration Board Power Supply for VIPER26 for Switched Mode Power Supply
- STMicroelectronics Demonstration Board for VIPer06XN for Power Supply
- STMicroelectronics Evaluation Board Step Down Switching Regulator for L4971 for Asynchronous Step-Down Power Switching
