Infineon Surface Hall Effect Sensor 4.5 V 5.5 V, SPC, TDSO, 8-Pin
- RS-artikelnummer:
- 236-3688
- Tillv. art.nr:
- TLE4999C8XUMA1
- Tillverkare / varumärke:
- Infineon
Mängdrabatt möjlig
Antal (1 enhet)*
75,56 kr
(exkl. moms)
94,45 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- Dessutom levereras 2 373 enhet(er) från den 19 januari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 - 9 | 75,56 kr |
| 10 - 99 | 69,33 kr |
| 100 - 249 | 63,95 kr |
| 250 - 499 | 59,36 kr |
| 500 + | 57,68 kr |
*vägledande pris
- RS-artikelnummer:
- 236-3688
- Tillv. art.nr:
- TLE4999C8XUMA1
- Tillverkare / varumärke:
- Infineon
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Infineon | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Hall Effect | |
| Technology | Digital | |
| Mount Type | Surface | |
| Interface Type | SPC | |
| Minimum Supply Voltage | 4.5V | |
| Maximum Supply Voltage | 5.5V | |
| Package Type | TDSO | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Pin Count | 8 | |
| Length | 5.17mm | |
| Width | 4.02 mm | |
| Series | TLE4999 | |
| Height | 1.2mm | |
| Standards/Approvals | No | |
| Automotive Standard | AEC-Q100 | |
| Supply Current | 4mA | |
| Välj alla | ||
|---|---|---|
Brand Infineon | ||
Product Type Hall Effect Sensor | ||
Sensor Type Hall Effect | ||
Technology Digital | ||
Mount Type Surface | ||
Interface Type SPC | ||
Minimum Supply Voltage 4.5V | ||
Maximum Supply Voltage 5.5V | ||
Package Type TDSO | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Pin Count 8 | ||
Length 5.17mm | ||
Width 4.02 mm | ||
Series TLE4999 | ||
Height 1.2mm | ||
Standards/Approvals No | ||
Automotive Standard AEC-Q100 | ||
Supply Current 4mA | ||
The Infineon XENSIV is a dual channel linear hall sensor with a bus-capable digital SPC interface. Both channels are integrated on one die in the chip. The highly accurate measurement channels can be used for a plausibility check on system level. This enables a high diagnostic coverage.
Operating automotive temperature range -40°C to 125°C
Digital temperature and stress compensation
Reverse-polarity and over voltage protection for VDD, GND and OUT pins
Main and sub channel programmable independently in EEPROM
Multipoint calibration up to 9 points
Frameholder mechanism
relaterade länkar
- Infineon Surface Hall Effect Sensor 4.5 V 5.5 V TDSO, 8-Pin
- Infineon Surface Hall Effect Sensor 4.5 V 5.5 V TDSO, 8-Pin
- Infineon Surface Hall Effect Sensor Latch 4.5 V 5.5 V 3-Pin
- Infineon SMD/SMT Hall Effect Sensor 4.5-5.5 V
- ams OSRAM Surface Hall Effect Sensor 4.5 V 5.5 V TSSOP, 20-Pin
- Broadcom Surface Hall Effect Sensor 4.5 V 5.5 V 8-Pin
- Allegro Microsystems Surface Hall Effect Sensor 4.5 V 5.5 V 3-Pin
- ams OSRAM Surface Hall Effect Sensor 4.5 V 5.5 V SOIC, 8-Pin