Infineon 3-Axis Surface Hall Effect Sensor 2.8 V 24 V, I2C, TSOP, 6-Pin
- RS-artikelnummer:
- 223-8564
- Tillv. art.nr:
- TLE493DW2B6A1HTSA1
- Tillverkare / varumärke:
- Infineon
Mängdrabatt möjlig
Antal (1 förpackning med 5 enheter)*
77,52 kr
(exkl. moms)
96,90 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- Dessutom levereras 2 295 enhet(er) från den 22 december 2025
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per förpackning* |
|---|---|---|
| 5 - 5 | 15,504 kr | 77,52 kr |
| 10 - 95 | 14,246 kr | 71,23 kr |
| 100 - 245 | 13,126 kr | 65,63 kr |
| 250 - 495 | 12,208 kr | 61,04 kr |
| 500 + | 11,85 kr | 59,25 kr |
*vägledande pris
- RS-artikelnummer:
- 223-8564
- Tillv. art.nr:
- TLE493DW2B6A1HTSA1
- Tillverkare / varumärke:
- Infineon
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Infineon | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Hall Effect | |
| Number of Axis | 3 | |
| Technology | Digital | |
| Mount Type | Surface | |
| Interface Type | I2C | |
| Maximum Frequency Response | 100kHz | |
| Minimum Frequency Response | 5.5kHz | |
| Minimum Supply Voltage | 2.8V | |
| Package Type | TSOP | |
| Maximum Supply Voltage | 24V | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 6 | |
| Maximum Operating Temperature | 150°C | |
| Length | 2.9mm | |
| Standards/Approvals | No | |
| Height | 1mm | |
| Width | 1.6 mm | |
| Series | TLE493D-W2B6 | |
| Supply Current | 3.4mA | |
| Automotive Standard | No | |
| Välj alla | ||
|---|---|---|
Brand Infineon | ||
Product Type Hall Effect Sensor | ||
Sensor Type Hall Effect | ||
Number of Axis 3 | ||
Technology Digital | ||
Mount Type Surface | ||
Interface Type I2C | ||
Maximum Frequency Response 100kHz | ||
Minimum Frequency Response 5.5kHz | ||
Minimum Supply Voltage 2.8V | ||
Package Type TSOP | ||
Maximum Supply Voltage 24V | ||
Minimum Operating Temperature -40°C | ||
Pin Count 6 | ||
Maximum Operating Temperature 150°C | ||
Length 2.9mm | ||
Standards/Approvals No | ||
Height 1mm | ||
Width 1.6 mm | ||
Series TLE493D-W2B6 | ||
Supply Current 3.4mA | ||
Automotive Standard No | ||
The Infineon XENSIV series is a 3D magnetic sensor with enhanced dynamic wake up feature. Four pre-programmed address options will be available, enabling for a fast start up initialization, when used in I2 C bus configurations. It also includes enhanced test options and a safety documentation is available to enable the usage of this sensor in the context of ASIL B systems.
Component reduction due to 3D magnetic measurement principle
Wide application range addressable due to high flexibility
Platform adaptability due to device configurability
Supporting functional safety by means of integrated diagnostics
Very low system power consumption due to wake up mode
Disturbance of smaller stray fields are neglectable compared to the high magnetic flux measurement range
relaterade länkar
- Infineon 3-Axis Surface Hall Effect Sensor 2.8 V 24 V TSOP, 6-Pin
- Infineon 3-Axis Surface Hall Effect Sensor 2.8 V 3.5 V TSOP, 6-Pin
- Infineon Surface Hall Effect Sensor 2.8 V 3.5 V TSOP, 6-Pin
- Infineon 3-Axis Surface Hall Effect Sensor 2.8 V 3.5 V SSOP-14, 5-Pin
- Infineon 3-Axis Surface Position Sensor 2.8 V 24 V TSOP, 6-Pin
- Infineon 3-Axis Surface Position Sensor 2.8 V 3.5 V TSOP, 6-Pin
- Infineon Surface Hall Effect Sensor -0.3 V 3.5 V TSOP-6, 6-Pin
- Infineon Through Hole Hall Effect Sensor 2.8 V 3.5 V SSO, 3-Pin