Infineon 3-Axis Surface Hall Effect Sensor 2.8 V 3.5 V, I2C, TSOP, 6-Pin
- RS-artikelnummer:
- 223-8559
- Tillv. art.nr:
- TLE493DA2B6HTSA1
- Tillverkare / varumärke:
- Infineon
Antal (1 rulle med 3000 enheter)*
29 319,00 kr
(exkl. moms)
36 648,00 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 01 juni 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per rulle* |
|---|---|---|
| 3000 + | 9,773 kr | 29 319,00 kr |
*vägledande pris
- RS-artikelnummer:
- 223-8559
- Tillv. art.nr:
- TLE493DA2B6HTSA1
- Tillverkare / varumärke:
- Infineon
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Infineon | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Hall Effect | |
| Number of Axis | 3 | |
| Technology | Analogue | |
| Mount Type | Surface | |
| Interface Type | I2C | |
| Minimum Supply Voltage | 2.8V | |
| Maximum Supply Voltage | 3.5V | |
| Package Type | TSOP | |
| Minimum Operating Temperature | -40°C | |
| Pin Count | 6 | |
| Maximum Operating Temperature | 125°C | |
| Series | TLE493D-A2B6 | |
| Standards/Approvals | No | |
| Height | 1.1mm | |
| Width | 1.6 mm | |
| Length | 2.9mm | |
| Automotive Standard | No | |
| Supply Current | 3.4mA | |
| Välj alla | ||
|---|---|---|
Brand Infineon | ||
Product Type Hall Effect Sensor | ||
Sensor Type Hall Effect | ||
Number of Axis 3 | ||
Technology Analogue | ||
Mount Type Surface | ||
Interface Type I2C | ||
Minimum Supply Voltage 2.8V | ||
Maximum Supply Voltage 3.5V | ||
Package Type TSOP | ||
Minimum Operating Temperature -40°C | ||
Pin Count 6 | ||
Maximum Operating Temperature 125°C | ||
Series TLE493D-A2B6 | ||
Standards/Approvals No | ||
Height 1.1mm | ||
Width 1.6 mm | ||
Length 2.9mm | ||
Automotive Standard No | ||
Supply Current 3.4mA | ||
The Infineon XENSIV series automotive low power 3D magnetic sensor with I2C Interface is designed for all kinds of sensing applications, especially in the automotive area such as multi function steering wheel. It measures the magnetic field in X, Y and Z direction. Each X, Y and Z hall probe is connected sequentially to a multiplexer, which is then connected to an analog to digital converter.
Component reduction due to 3D magnetic measurement principle
Wide application range addressable due to high flexibility
Platform adaptability due to device configurability
Disturbance of smaller stray fields are neglectable compared to the high magnetic flux measurement range
relaterade länkar
- Infineon 3-Axis Surface Hall Effect Sensor 2.8 V 3.5 V TSOP, 6-Pin
- Infineon 3-Axis Surface Hall Effect Sensor 2.8 V 24 V TSOP, 6-Pin
- Infineon Surface Hall Effect Sensor 2.8 V 3.5 V TSOP, 6-Pin
- Infineon 3-Axis Surface Hall Effect Sensor 2.8 V 3.5 V SSOP-14, 5-Pin
- Infineon 3-Axis Surface Position Sensor 2.8 V 3.5 V TSOP, 6-Pin
- Infineon Surface Hall Effect Sensor -0.3 V 3.5 V TSOP-6, 6-Pin
- Infineon Through Hole Hall Effect Sensor 2.8 V 3.5 V SSO, 3-Pin
- Infineon 3-Axis Absolute Orientation Sensor 2.8 V 3.5 V PG-TSOP-6-6-5, 6-Pin