Infineon 3-Axis Surface Hall Effect Sensor 2.8 V 3.5 V, I2C, SSOP-14, 5-Pin
- RS-artikelnummer:
- 258-4175
- Tillv. art.nr:
- TLI493DW2BWA0XTSA1
- Tillverkare / varumärke:
- Infineon
Mängdrabatt möjlig
Antal (1 förpackning med 2 enheter)*
31,03 kr
(exkl. moms)
38,788 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Sista RS lager
- Slutlig(a) 1 790 enhet(er), redo att levereras
Enheter | Per enhet | Per förpackning* |
|---|---|---|
| 2 - 8 | 15,515 kr | 31,03 kr |
| 10 - 98 | 13,33 kr | 26,66 kr |
| 100 - 248 | 10,53 kr | 21,06 kr |
| 250 - 498 | 9,69 kr | 19,38 kr |
| 500 + | 8,85 kr | 17,70 kr |
*vägledande pris
- RS-artikelnummer:
- 258-4175
- Tillv. art.nr:
- TLI493DW2BWA0XTSA1
- Tillverkare / varumärke:
- Infineon
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Infineon | |
| Product Type | Hall Effect Sensor | |
| Sensor Type | Hall Effect | |
| Number of Axis | 3 | |
| Mount Type | Surface | |
| Interface Type | I2C | |
| Maximum Frequency Response | 1000kHz | |
| Minimum Frequency Response | 400kHz | |
| Minimum Supply Voltage | 2.8V | |
| Maximum Supply Voltage | 3.5V | |
| Package Type | SSOP-14 | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 125°C | |
| Pin Count | 5 | |
| Length | 1.13mm | |
| Width | 0.93 mm | |
| Standards/Approvals | IPC/JEDEC J-STD-020, RoHS | |
| Height | 0.59mm | |
| Automotive Standard | No | |
| Supply Current | 7nA | |
| Välj alla | ||
|---|---|---|
Brand Infineon | ||
Product Type Hall Effect Sensor | ||
Sensor Type Hall Effect | ||
Number of Axis 3 | ||
Mount Type Surface | ||
Interface Type I2C | ||
Maximum Frequency Response 1000kHz | ||
Minimum Frequency Response 400kHz | ||
Minimum Supply Voltage 2.8V | ||
Maximum Supply Voltage 3.5V | ||
Package Type SSOP-14 | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 125°C | ||
Pin Count 5 | ||
Length 1.13mm | ||
Width 0.93 mm | ||
Standards/Approvals IPC/JEDEC J-STD-020, RoHS | ||
Height 0.59mm | ||
Automotive Standard No | ||
Supply Current 7nA | ||
The Infineon XENSIV is the device for industrial and consumer applications, the low power 3D hall sensor with I2C interface. It uses our latest 3D Hall generation and is housed in an extremely small wafer-level package. With an 87 percent smaller footprint and 46 percent less height than previous comparable products, the sensor paves the way for new design options. Due to the small WLB-5 package and the low current consumption of 7 nA in power-down mode, the magnetic sensor is also suitable for use in applications that previously used resistor-based or optical solutions.
Power down mode with 7 nA (typ.) power consumption
Variable update frequencies and power modes
Triggering by external microcontroller possible via I2C protocol
X-Y angular measurement mode
Interrupt signal to indicate a valid measurement to the microcontroller
Pb-free (RoHS compliant) and halogen free package
relaterade länkar
- Infineon 3-Axis Surface Hall Effect Sensor 2.8 V 3.5 V SSOP-14, 5-Pin
- Infineon 3-Axis Surface Hall Effect Sensor 2.8 V 3.5 V TSOP, 6-Pin
- Infineon 3-Axis Surface Hall Effect Sensor 2.8 V 24 V TSOP, 6-Pin
- Infineon Through Hole Hall Effect Sensor 2.8 V 3.5 V SSO, 3-Pin
- Infineon Surface Hall Effect Sensor 2.8 V 3.5 V TSOP, 6-Pin
- ams OSRAM 1-Axis Surface Hall Effect Sensor 3.3 V 5 V PWM 16-Pin
- Infineon 3-Axis Surface Position Sensor 2.8 V 3.5 V TSOP, 6-Pin
- Melexis 1-Axis Through Hole Hall Effect Sensor 3.5 V 24 V 3-Pin