Allegro Microsystems Through Hole Hall Effect Sensor 3.8 V 24 V, Ultra Mini SIP, 3-Pin

Antal (1 påse med 500 enheter)*

6 322,00 kr

(exkl. moms)

7 902,50 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • 1 500 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
Per påse*
500 +12,644 kr6 322,00 kr

*vägledande pris

RS-artikelnummer:
170-9087
Tillv. art.nr:
A1101EUA-T
Tillverkare / varumärke:
Allegro Microsystems
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Allegro Microsystems

Product Type

Hall Effect Sensor

Sensor Type

Hall Effect Sensors

Technology

BiCMOS

Mount Type

Through Hole

Magnetic Type

Unipolar

Minimum Supply Voltage

3.8V

Maximum Supply Voltage

24V

Package Type

Ultra Mini SIP

Minimum Operating Temperature

-40°C

Pin Count

3

Maximum Operating Temperature

85°C

Width

1.52 mm

Standards/Approvals

No

Length

4.09mm

Height

3.02mm

Series

A1101

Response Time

4μs

Automotive Standard

AEC-Q100

Supply Current

7.5mA

COO (ursprungsland):
PH

A1101/2/3/4/6 Hall Effect Sensor Switch, Allegro Microsystems


The Allegro A1101/2/3/4 and A1106 Hall-effect switches are produced with BiCMOS technology enabling fast power-on time and low-noise operation. Device programming is performed after packaging, to ensure increased switch-point accuracy by eliminating offsets that could be induced by package stress.

Unique Hall element geometries and low offset amplifiers minimise noise and to reduce the residual offset voltage normally caused by device over-molding and thermal stress.

The Allegro A1101/2/3/4 and A1106 a voltage regulator, Hall voltage generator, small-signal amplifier, Schmitt trigger, and NMOS output transistor.

The integrated voltage regulator permits operation from 3.8 V to 24 V and on-board protection circuitry provides a ±30 V absolute maximum voltage rating. All devices in the family are identical except for magnetic switchpoint levels.

Continuous-time operation with fast power-on time and low noise

Stable operation over full operating temperature range

Reverse battery protection

Solid-state reliability

Factory-programmed at end of line for optimum performance

Robust EMC performance

High ESD rating

Regulator stability without a bypass capacitor

Hall Effect Sensors, Allegro MicroSystems


relaterade länkar