NXP, 16bit ARM7TDMI-S, LPC24 Microcontroller, 72MHz, 512 kB Flash, 208-Pin LQFP

Se alla Microcontrollers
För närvarande inte tillgänglig
Vi vet inte om den här artikeln kommer tillbaka i lager, RS har för avsikt att ta bort den från vårt utbud snart.
Förpackningsalternativ:
RS-artikelnummer:
725-7815
Tillv. art.nr:
LPC2478FBD208,551
Tillverkare / varumärke:
NXP
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

NXP

Family Name

LPC24

Package Type

LQFP

Mounting Type

Surface Mount

Pin Count

208

Device Core

ARM7TDMI-S

Data Bus Width

16 bit, 32bit

Program Memory Size

512 kB

Maximum Frequency

72MHz

RAM Size

4 kB, 98 kB

USB Channels

1 x Device, 1 x OHCI, 1 x OTG

Number of PWM Units

1

Number of SPI Channels

3

Number of UART Channels

4

Number of I2C Channels

3

Typical Operating Supply Voltage

3.3 V

Number of USART Channels

0

Number of CAN Channels

2

Length

28.1mm

ADCs

8 x 10 bit

Number of ADC Units

1

Instruction Set Architecture

RISC

Maximum Operating Temperature

+85 °C

Pulse Width Modulation

2 (PWM)

Number of Ethernet Channels

1

Number of LIN Channels

0

Height

1.45mm

Dimensions

28.1 x 28.1 x 1.45mm

Minimum Operating Temperature

-40 °C

Program Memory Type

Flash

Width

28.1mm

Number of PCI Channels

0

ARM7 Family Microcontrollers, NXP


A range of NXP microcontrollers based on a 16/32-bit ARM7TDMI-S CPU with real-time emulation and embedded trace support, that combine the microcontroller with 32 kB, 64 kB, 128 kB, 256 kB and 512 kB of embedded high-speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at maximum clock rate.

High integration and low power consumption
wide range of serial communications interfaces and on-chip SRAM options
Alternative 16-bit Thumb-mode reduces code by more than 30 % with minimal performance penalty
32 bit timers, PWM channels and up to 47 GPIO lines
Ideally suited to industrial control and medical systems

relaterade länkar