NXP, 16bit ARM7TDMI-S, LPC24 Microcontroller, 72MHz, 512 kB Flash, 180-Pin TFBGA

Se alla Microcontrollers
Mängdrabatt möjlig

Antal (1 enhet)*

206,38 kr

(exkl. moms)

257,98 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • Dessutom levereras 48 enhet(er) från den 08 december 2025
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 - 8206,38 kr
9 - 46200,95 kr
47 - 94195,74 kr
95 +190,86 kr

*vägledande pris

Förpackningsalternativ:
RS-artikelnummer:
725-7809
Tillv. art.nr:
LPC2458FET180,551
Tillverkare / varumärke:
NXP
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

NXP

Family Name

LPC24

Package Type

TFBGA

Mounting Type

Surface Mount

Pin Count

180

Device Core

ARM7TDMI-S

Data Bus Width

16 bit, 32bit

Program Memory Size

512 kB

Maximum Frequency

72MHz

RAM Size

4 kB, 98 kB

USB Channels

1 x Device, 1 x OHCI, 1 x OTG

Number of PWM Units

1

Number of SPI Channels

3

Number of UART Channels

4

Number of USART Channels

0

Typical Operating Supply Voltage

3.3 V

Number of I2C Channels

3

Number of CAN Channels

2

Minimum Operating Temperature

-40 °C

Number of ADC Units

1

Length

12.2mm

ADCs

8 x 10 bit

Instruction Set Architecture

RISC

Pulse Width Modulation

2 (PWM)

Width

12.2mm

Dimensions

12.2 x 12.2 x 0.85mm

Height

0.85mm

Number of LIN Channels

0

Number of Ethernet Channels

1

Maximum Operating Temperature

+85 °C

Program Memory Type

Flash

Number of PCI Channels

0

ARM7 Family Microcontrollers, NXP


A range of NXP microcontrollers based on a 16/32-bit ARM7TDMI-S CPU with real-time emulation and embedded trace support, that combine the microcontroller with 32 kB, 64 kB, 128 kB, 256 kB and 512 kB of embedded high-speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at maximum clock rate.

High integration and low power consumption
wide range of serial communications interfaces and on-chip SRAM options
Alternative 16-bit Thumb-mode reduces code by more than 30 % with minimal performance penalty
32 bit timers, PWM channels and up to 47 GPIO lines
Ideally suited to industrial control and medical systems

Note

NXP is a trademark of NXP B.V.

relaterade länkar