NXP, 16bit ARM7TDMI-S, LPC24 Microcontroller, 72MHz ROMLess, 208-Pin LQFP

Se alla Microcontrollers

Antal (1 fack med 36 enheter)*

6 471,36 kr

(exkl. moms)

8 089,20 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
Tillfälligt slut
  • Leverans från den 30 juni 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
Per Bricka*
36 +179,76 kr6 471,36 kr

*vägledande pris

RS-artikelnummer:
166-0443
Tillv. art.nr:
LPC2460FBD208,551
Tillverkare / varumärke:
NXP
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

NXP

Family Name

LPC24

Package Type

LQFP

Mounting Type

Surface Mount

Pin Count

208

Device Core

ARM7TDMI-S

Data Bus Width

16 bit, 32bit

Maximum Frequency

72MHz

RAM Size

4 kB, 98 kB

USB Channels

1 x Device, 1 x OHCI, 1 x OTG

Number of PWM Units

1

Number of SPI Channels

3

Number of USART Channels

0

Number of CAN Channels

2

Number of UART Channels

4

Number of I2C Channels

3

Typical Operating Supply Voltage

3.3 V

Number of PCI Channels

0

Number of Ethernet Channels

1

Instruction Set Architecture

RISC

Minimum Operating Temperature

-40 °C

Pulse Width Modulation

2 (PWM)

Dimensions

28.1 x 28.1 x 1.45mm

Width

28.1mm

Program Memory Type

ROMLess

Height

1.45mm

Number of LIN Channels

0

ADCs

8 x 10 bit

Length

28.1mm

Maximum Operating Temperature

+85 °C

Number of ADC Units

1

Maximum Number of Ethernet Channels

1

COO (Country of Origin):
TW

ARM7 Family Microcontrollers, NXP


A range of NXP microcontrollers based on a 16/32-bit ARM7TDMI-S CPU with real-time emulation and embedded trace support, that combine the microcontroller with 32 kB, 64 kB, 128 kB, 256 kB and 512 kB of embedded high-speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at maximum clock rate.

High integration and low power consumption
wide range of serial communications interfaces and on-chip SRAM options
Alternative 16-bit Thumb-mode reduces code by more than 30 % with minimal performance penalty
32 bit timers, PWM channels and up to 47 GPIO lines
Ideally suited to industrial control and medical systems

Note

NXP is a trademark of NXP B.V.

relaterade länkar