Specifikationer

Datablad

Lagstiftning och ursprungsland

Produktdetaljer

Hitta liknande produkter genom att välja ett eller flera attribut.

Välj alla	Attribut	Värde
	Varumärke	RS PRO
	Produkttyp	Filamenttråd för 3D-skrivare
	Materialtyp	HIPS
	Utskriftsteknik	Smält pålagrad modellering (FDM, Fused Deposition Modeling)
	Maskinspecifik	Nej
	Färg	Naturell
	För användning med	Common Desktop 3D Printers
	Vikt	500g
	Diameter	1.75mm
	Utskriftsmaterial	HIPS

	Välj alla
	Varumärke RS PRO
	Produkttyp Filamenttråd för 3D-skrivare
	Materialtyp HIPS
	Utskriftsteknik Smält pålagrad modellering (FDM, Fused Deposition Modeling)
	Maskinspecifik Nej
	Färg Naturell
	För användning med Common Desktop 3D Printers
	Vikt 500g
	Diameter 1.75mm
	Utskriftsmaterial HIPS

COO (ursprungsland):: NL

RS 3D Printer Filaments HIPS

HIPS is an easy to print, High Impact Polystyrene filament with multifunctional properties. HIPS is an excellent support material in combination with ABS, because it dissolves in D'limonene and ABS remains unaffected

HIPS is very suitable for detailed prints, but also for large objects because the material shows very limited warping. Furthermore HIPS is very light and durable, has good interlayer bonding, can be glued easily and the colours result in a smooth matt surface of the 3D printed objects. High Impact Polystyrene is therefore widely used in model building

Dissolves in D'limonene

High impact-resistance

Can be glued easily

For matt, detailed, complex or large prints

Light and durable

Virtually no "warping"

Additional info:

Recommended temperature for heated bed is ± 65-110ﾟC.

The speed with which HIPS dissolves in D'limonene is depending on the volume and improves by movement..

HIPS can be used on all common desktop FDM or FFF technology 3D printers.

Storage: Cool and dry (15-25ﾟC) and away from UV light. This enhances the shelf life significantly

Once you’ve purchased your filament it’s important to store it correctly to maintain its quality. Over time the plastic will absorb moisture from the air, creating small water bubbles in the filament. These bubbles when heated in the extruder nozzle will quickly reach boiling point, spoiling the print. The use of desiccant dehumidifiers to absorb the moisture is highly recommend

RS PRO 1.75 mm Naturell HIPS Filamenttråd för 3D-skrivare, 500 g

RS 3D Printer Filaments HIPS

Relaterade länkar

Håll dig uppdaterad om våra senaste produkter och tjänster