Senaste sökningar

    10-27563, Single Sided DIN 41612 Eurocard FR4 1.02mm Holes, 100 x 160 x 1.6mm

    RS-artikelnummer:
    435-434
    Tillv. art.nr:
    10-27563
    Tillverkare / varumärke:
    Vero Technologies
    Vero Technologies
    Se alla Eurocards
    45 I lager för avsändande samma dag
    Add to Basket
    Enheter

    Lagt till varukorgen

    Pris (ex. moms) Each

    291,82 kr

    (exkl. moms)

    364,78 kr

    (inkl. moms)

    EnheterPer unit
    1 - 4291,82 kr
    5 - 9277,20 kr
    10 - 39262,68 kr
    40 +247,96 kr
    RS-artikelnummer:
    435-434
    Tillv. art.nr:
    10-27563
    Tillverkare / varumärke:
    Vero Technologies
    COO (Country of Origin):
    GB

    Datablad


    Lagstiftning och ursprungsland

    COO (Country of Origin):
    GB

    Produktdetaljer

    Single-Sided Microboard


    Single-sided microboards have the same wiring pattern as the double-sided types, but omit the ground plane and 0 Volt rails on the component side of the card.
    They are, therefore, more suited to lower clock speed, non-critical applications.



    DIN Type Stripboards


    Suitable for use with the KM6-II eurocard sub-rack systems


    The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way DIN 41612 indirect edge connectors may be fitted at either end.
    The 3U (100x160) and 6U (233.4x160) boards are available with plated through holes (pth) as an alternative to the standard types. These boards have the added advantage of linking the top with the bottom pads directly via the holes, thereby dispensing with the need to fit linking pins, etc. Also the integrity of the joint is improved as the solder forms round the component lead on both surfaces, in addition to flowing through the hole. This helps to produce a solid and reliable connection, which is very important in applications where a high degree of vibration may be encountered.
    Eurocards are manufactured from either epoxy glass material (blue) to BS4584 Part 3 or 16, or SRBP (synthetic resin bonded paper) material to BS4584 Part 5. Card thickness is 1.6mm. Copper 305g/m2 (1oz/ft2). Holes 1.0mm (0.040in.) dia. are pre-drilled on a 2.54mm matrix and all cards can be used with indirect edge connectors to DIN41612 (see Connectors/Terminals) except SRBP stripboard.

    Note

    Single-sided microboards have the same wiring pattern as the double-sided types, but omit the ground plane and 0 Volt rails on the component side of the card.


    Specifikationer

    AttributeValue
    Base MaterialEpoxy Glass Fabric Laminate
    Number of Sides1
    Dimensions100 x 160 x 1.6mm
    Hole Diameter1.02mm
    Hole Pitch2.54 x 2.54mm
    ConnectionDIN 41612
    FR Material GradeFR4
    Length160mm
    Thickness1.6mm
    Width100mm
    45 I lager för avsändande samma dag
    Add to Basket
    Enheter

    Lagt till varukorgen

    Pris (ex. moms) Each

    291,82 kr

    (exkl. moms)

    364,78 kr

    (inkl. moms)

    EnheterPer unit
    1 - 4291,82 kr
    5 - 9277,20 kr
    10 - 39262,68 kr
    40 +247,96 kr