Senaste sökningar

    10-0581, Single Sided Eurocard FR2 With 53 x 5 1.02mm Holes, 100 x 160 x 1.6mm

    RS-artikelnummer:
    434-380
    Tillv. art.nr:
    10-0581
    Tillverkare / varumärke:
    Vero Technologies
    Vero Technologies
    Se alla Eurocards
    1 I lager för avsändande samma dag
    Add to Basket
    Enheter

    Lagt till varukorgen

    Pris (ex. moms) Each

    374,93 kr

    (exkl. moms)

    468,66 kr

    (inkl. moms)

    EnheterPer unit
    1 - 4374,93 kr
    5 - 9356,21 kr
    10 - 39337,48 kr
    40 +318,76 kr
    RS-artikelnummer:
    434-380
    Tillv. art.nr:
    10-0581
    Tillverkare / varumärke:
    Vero Technologies
    COO (Country of Origin):
    GB

    Lagstiftning och ursprungsland

    COO (Country of Origin):
    GB

    Produktdetaljer

    High Density DIP board, Single Sided


    Ideal for high density circuitry using wirewrapping, hardwiring or Verowire interconnection rechniques.


    Prototyping DIP board, high density
    3U Eurocard format PCB from copper clad SRBP material UL94 V0 rated
    Two Vcc and one 0V power rail options
    DIN 41494 cardframe compatible
    DIN 41612 connector pattern, up to 64/96 ways
    Microbus backplane compatible



    DIN Type Stripboards


    Suitable for use with the KM6-II eurocard sub-rack systems


    The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way DIN 41612 indirect edge connectors may be fitted at either end.
    The 3U (100x160) and 6U (233.4x160) boards are available with plated through holes (pth) as an alternative to the standard types. These boards have the added advantage of linking the top with the bottom pads directly via the holes, thereby dispensing with the need to fit linking pins, etc. Also the integrity of the joint is improved as the solder forms round the component lead on both surfaces, in addition to flowing through the hole. This helps to produce a solid and reliable connection, which is very important in applications where a high degree of vibration may be encountered.
    Eurocards are manufactured from either epoxy glass material (blue) to BS4584 Part 3 or 16, or SRBP (synthetic resin bonded paper) material to BS4584 Part 5. Card thickness is 1.6mm. Copper 305g/m2 (1oz/ft2). Holes 1.0mm (0.040in.) dia. are pre-drilled on a 2.54mm matrix and all cards can be used with indirect edge connectors to DIN41612 (see Connectors/Terminals) except SRBP stripboard.

    Note

    Single-sided microboards have the same wiring pattern as the double-sided types, but omit the ground plane and 0 Volt rails on the component side of the card.


    Specifikationer

    AttributeValue
    Base MaterialSynthetic Resin Bonded Paper
    Number of Sides1
    Dimensions100 x 160 x 1.6mm
    Hole Diameter1.02mm
    Hole Layout53 x 5
    Hole Pitch2.54 x 2.54mm
    FR Material GradeFR2
    Length160mm
    Thickness1.6mm
    Width100mm
    1 I lager för avsändande samma dag
    Add to Basket
    Enheter

    Lagt till varukorgen

    Pris (ex. moms) Each

    374,93 kr

    (exkl. moms)

    468,66 kr

    (inkl. moms)

    EnheterPer unit
    1 - 4374,93 kr
    5 - 9356,21 kr
    10 - 39337,48 kr
    40 +318,76 kr