Digilent 410-249 Programming Adapter for use with Xilinx FPGAs

Se kategorien
Mängdrabatt möjlig

Antal (1 enhet)*

685,01 kr

(exkl. moms)

856,26 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • Dessutom levereras 14 enhet(er) från den 29 december 2025
  • Dessutom levereras 46 enhet(er) från den 16 januari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 - 4685,01 kr
5 - 9650,72 kr
10 +630,11 kr

*vägledande pris

RS-artikelnummer:
134-6458
Distrelec artikelnummer:
300-44-264
Tillv. art.nr:
410-249
Tillverkare / varumärke:
Digilent
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Digilent

Product Type

Development Kit Accessory

Accessory Type

Programming Adapter

For Use With

Xilinx FPGAs

Standards/Approvals

No

Distrelec Product Id

30044264

COO (Country of Origin):
TW

JTAG-HS2 FPGA Programming Cable


The JTAG-HS2 programming cable allows high-speed programming of Xilinx FPGA devices from a host PC.

Features


• Compatible with all Xilinx tools

• Compatible with IEEE 1149.7-2009 Class T0 - Class T4 (includes 2-Wire JTAG)

• On-board ADP123AUJZ 300mA voltage regulator

• Separate Vref drives JTAG/SPI signal voltages

• Vref can be any voltage between +1.8V and +5V

• USB 2.0 HS port drives JTAG/SPI bus at up to 30Mbit/sec

• JTAG/SPI frequency settable by user

• PC connector: MicroUSB

• JTAG connector: 0.1in 6-pin

• SPI programming modes 0/2 up to 30Mbit/sec, modes 1/3 up to 2Mbit/sec

• Fully supported by Digilent's Adept software and Adept SDK

Supported Target Devices


• Xilinx FPGAs

• Xilinx Zynq-7000

• Xilinx CoolRunner™/CoolRunner-II CPLDs

• Xilinx Platform Flash ISP configuration PROMs

• Selected third-party SPI PROMs

• Selected third-party BPI PROMs

Target Devices Not Supported


• Xilinx 9500/9500XL CPLDs

• Xilinx 1700 and 18V00 ISP configuration PROMs

• Xilinx FPGA eFUSE programming

An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.

Note

This cable is not needed for Digilent Xilinx FPGA boards as they have this functionality built-in.

Supplied with

Xilinx JTAG 2 x 7-pin 2mm connector adapter, USB cable

relaterade länkar