Digilent 410-308 Programming Module for use with FPGA Devices
- RS-artikelnummer:
- 134-6473
- Tillv. art.nr:
- 410-308
- Tillverkare / varumärke:
- Digilent
Mängdrabatt möjlig
Antal (1 enhet)*
529,62 kr
(exkl. moms)
662,02 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- 12 enhet(er) levereras från den 16 januari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 - 4 | 529,62 kr |
| 5 - 9 | 503,22 kr |
| 10 + | 487,31 kr |
*vägledande pris
- RS-artikelnummer:
- 134-6473
- Tillv. art.nr:
- 410-308
- Tillverkare / varumärke:
- Digilent
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Digilent | |
| Product Type | Development Kit Accessory | |
| Accessory Type | Programming Module | |
| For Use With | FPGA Devices | |
| Standards/Approvals | No | |
| Välj alla | ||
|---|---|---|
Brand Digilent | ||
Product Type Development Kit Accessory | ||
Accessory Type Programming Module | ||
For Use With FPGA Devices | ||
Standards/Approvals No | ||
JTAG-SMT2 SMT Programming Module
The JTAG-SMT2 surface-mount programming module allows high-speed programming of Xilinx FPGA devices from a host PC. Users can solder the module directly onto a target board like any other component. Note: The JTAG-SMT2-NC part (RS 134-6473) does not have a USB connector fitted.
Features
• Compatible with all Xilinx tools
• Compatible with IEEE 1149.7-2009 Class T0 - Class T4 (includes 2-Wire JTAG)
• On-board ADP123AUJZ 300mA voltage regulator
• Separate Vref drives JTAG/SPI signal voltages
• Vref can be any voltage between +1.8V and +5V
• USB 2.0 HS port drives JTAG/SPI bus at up to 30Mbit/sec
• JTAG/SPI frequency settable by user
• PC connector: MicroUSB (JTAG-SMT2 only)
• GPIO pin allows processor reset of Xilinx Zynq platform
• SPI programming modes 0/2 up to 30Mbit/sec, modes 1/3 up to 2Mbit/sec
• Fully supported by Digilent's Adept software and Adept SDK
• Board dimensions: 22.75 x 21.5mm
RS Product Codes
• 134-6434 JTAG-SMT2 SMT Module
• 134-6473 JTAG-SMT2-NC SMT Module (without USB connector)
An FPGA is a semiconductor device consisting of a matrix of Configurable Logic Blocks (CLBs) connected through programmable interconnects. The user determines these interconnections by programming SRAM. A CLB can be simple (AND, OR gates, etc) or complex (a block of RAM). The FPGA allows changes to be made to a design even after the device is soldered into a PCB.
Note
This module is not needed for Digilent Xilinx FPGA boards as they have this functionality built-in.
relaterade länkar
- Digilent 410-251 Programming Module for use with FPGA Devices
- Digilent Pcam 5C OV5640, PB200-358 Module for FPGA 410-358
- Digilent 410-249 Programming Adapter for use with Xilinx FPGAs
- Digilent 410-372 Adapter for use with APSoC Development Board, FPGA
- Digilent 410-299 Programming Cable for use with Xilinx Tool, JTAG-HS3
- Digilent Module 410-310
- Digilent Module 410-212
- Digilent 410-319-1 FPGA Development Board for Makers and Hobbyists Development Board