Digilent 410-376 Xilinx Spartan-7 Development Board
- RS-artikelnummer:
- 184-0485
- Tillv. art.nr:
- 410-376
- Tillverkare / varumärke:
- Digilent
Mängdrabatt möjlig
Antal (1 enhet)*
1 140,45 kr
(exkl. moms)
1 425,56 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- 7 enhet(er) levereras från den 26 december 2025
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 - 1 | 1 140,45 kr |
| 2 - 4 | 1 110,37 kr |
| 5 - 9 | 1 081,92 kr |
| 10 + | 1 054,82 kr |
*vägledande pris
- RS-artikelnummer:
- 184-0485
- Tillv. art.nr:
- 410-376
- Tillverkare / varumärke:
- Digilent
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Digilent | |
| Programmable Logic Technology | FPGA | |
| Kit Classification | Development Board | |
| Kit Name | Xilinx Spartan-7 | |
| Välj alla | ||
|---|---|---|
Brand Digilent | ||
Programmable Logic Technology FPGA | ||
Kit Classification Development Board | ||
Kit Name Xilinx Spartan-7 | ||
Xilinx Spartan-7 FPGA (XC7S25-1CSGA225C)
3,650 slices containing four 6-input LUTs and 8 flip-flops
1,620 Kbits of fast block RAM
Three clock management tile, each with a phase-locked loop and mixed-mode clock manager
80 DSP slices
Internal clock speeds exceeding 450 MHz
On-chip analogue-to-digital converter (XADC)
Programmable over JTAG and Quad-SPI Flash
Memory
4 MB Quad-SPI Flash
Power
Powered from USB or 5V external supply connected to DIP pin 24 (micro USB cable NOT included)
USB
USB-JTAG programming circuitry
USB-UART bridge
Push-buttons and LEDs
2 Buttons
4 LEDs
1 RGB LED
Expansion Connectors
1 Pmod connector
8 total FPGA I/O
48-pin DIP form-factor headers
36 populated pins
32 total FPGA I/O
2 Single-ended 0-3.3V analogue inputs to XADC
3,650 slices containing four 6-input LUTs and 8 flip-flops
1,620 Kbits of fast block RAM
Three clock management tile, each with a phase-locked loop and mixed-mode clock manager
80 DSP slices
Internal clock speeds exceeding 450 MHz
On-chip analogue-to-digital converter (XADC)
Programmable over JTAG and Quad-SPI Flash
Memory
4 MB Quad-SPI Flash
Power
Powered from USB or 5V external supply connected to DIP pin 24 (micro USB cable NOT included)
USB
USB-JTAG programming circuitry
USB-UART bridge
Push-buttons and LEDs
2 Buttons
4 LEDs
1 RGB LED
Expansion Connectors
1 Pmod connector
8 total FPGA I/O
48-pin DIP form-factor headers
36 populated pins
32 total FPGA I/O
2 Single-ended 0-3.3V analogue inputs to XADC
relaterade länkar
- Digilent 410-352 Xilinx Spartan-7 Development Board for Hobbyists XC7S25-CSGA324
- Digilent 410-383-5EV Zynq Ultrascale+ MPSoC Development Board Development Board Xilinx Zynq UltraScale+ MPSoC EV Device
- Digilent USB104 A7: Artix-7 FPGA Development Board in PC/104 Form Factor Xilinx Artix-7 XC7A100T Development Board for
- Digilent 410-183 Basys Artix-7 Development Board
- Digilent 410-300 GENESYS2 KINTEX-7 Development Board
- Digilent 410-316 Nexys Video Artix-7 Development Board
- Digilent 410-319-1 FPGA Development Board for Makers and Hobbyists Development Board
- Digilent 410-370 Cora Z7: Zynq-7000 Development Board for ARM Development, FPGA Development
