Atmel ATSAMW25-XPRO 2.7 → 3.6V WiFi Module Evaluation Kit, 802.11b/g/n I2C, IrDA, LIN2, SPI, USART

Se alla Wi-Fi Modules
Inte tillgänglig
RS kommer inte längre att lagerföra denna produkt.
RS-artikelnummer:
885-2017
Tillv. art.nr:
ATSAMW25-XPRO
Tillverkare / varumärke:
Atmel
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Atmel

Supported Protocol

802.11b/g/n

Supported Security Standards

SSL, TLS, WAPI, WEP, WPA, WPA2

Supported Bus Interfaces

I2C, IrDA, LIN2, SPI, USART

Supply Voltage

2.7 → 3.6V

Maximum Operating Temperature

+85 °C

Minimum Operating Temperature

-40 °C

COO (Country of Origin):
MY

SmartConnect ATSAMW25-XPRO Evaluation Kit


The ATSAMW25 Xplained Pro Evaluation Kit forms part of the SmartConnect family of wireless solutions from Atmel. With the kit you can evaluate the ATSAM25H18-MR510PB WiFi module with support from Atmel Studio software.

Features & Benefits of the ATSAMW25-XPRO Evaluation Kit
•WiFi Module based on a combination of the 2/4 GHz IEEE® 802.11 b/g/n WiFi SoC and the ARM® Cortex® - M0+ ATSAMD21G18A microcontroller.
•On-board embedded debugger
•2 mechanical buttons
•1 yellow user LED
•1 WiFi status LED
•1 extension header
•Embedded debugger USB
•Target USB
•8 Mbit serial flash
•32 kHz crystal
•12 MHz crystal


SmartConnect Wi-Fi low power solutions allow engineers without any 802.11, RTOS, IP stack or RF experience, to easily integrate Wi-Fi into their IoT designs. The SmartConnect turnkey software that is available in Atmel Studio enables engineers to dedicate more time to adding functionality to their designs.

relaterade länkar