RF Solutions Wi-Fi-modul 3.6 V dc

Se alla Wi-Fi-moduler
För närvarande inte tillgänglig
Vi vet inte om den här artikeln kommer tillbaka i lager, RS har för avsikt att ta bort den från vårt utbud snart.
RS-artikelnummer:
238-6921
Tillv. art.nr:
ESP32-C3-32S
Tillverkare / varumärke:
RF Solutions
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Varumärke

RF Solutions

Produkttyp

Wi-Fi-modul

Säkerhetsstandarder som stöds

AES, WEP

Frekvens

2400MHz

Höjd

3.1mm

Längd

25.5mm

Gränssnittstyp

ADC, GPIO, I2C, SPI, UART

Minsta matningsspänning

3V

Maximal matningsspänning

3.6V dc

Bredd

18 mm

Minsta arbetsstemperatur

-40°C

Mottagande matningsström

500mA

Standarder/godkännanden

RoHS

COO (ursprungsland):
CN
The RF Solutions has This module core processor ESP32-C3 is a Wi-Fi+ BLE combination of system-level chips (SoC), designed for various applications such as internet of things (IoT), mobile devices, wearable electronics, smart home, etc. ESP32-C3 with industry-leading low power and RF performance, supporting Wi-Fi IEEE802.11b/g/n agreements and BLE 5.0.ESP32-C3 chip is equipped with a RISC-V 32-bit single-core processor, operating frequency up to 160 MHz. The chip is support to have secondary development without using other microcontrollers or processors.

Complete Wi-Fi 802.11b/g/n, 1T1R mode data rate up to 150Mbps

Support BLE5.0 and rate support：125Kbps, 500Kbps, 1Mbps, 2Mbps

32-bit RISC-V single-core processor, supports a clock frequency of up to 160 MHz, with 400 KB SRAM, 384 KB ROM, 8KB RTC SRAM

Support UART/PWM/GPIO/ADC/I2C/I2S interface, temperature sensor, pulse counter

SMD-38 package

Integrated Wi-Fi MAC/ BB/RF/PA/LNA/BLE

Support multiple sleep modes, deep sleep electric current is less than 5uA

UART rate up to 5Mbps

Support STA/AP/STA+AP mode and mix mode

Support Smart Config (APP)/AirKiss (WeChat) of Android and IOS One-click network configuration

Support UART port local upgrade and remote firmware upgrade (FOTA)

General AT commands can be better understand

Support secondary development, integrated Linux development environment

ESP-C3-32S module acquiesce in using the built-in 4MByte Flash, meanwhile support external Flash version

Relaterade länkar