Specifikationer

Datablad

Lagstiftning och ursprungsland

Produktdetaljer

Hitta liknande produkter genom att välja ett eller flera attribut.

Välj alla	Attribut	Värde
	Brand	ROHM
	Maximum Output Current	200mA
	Number of Outputs	1
	Output Voltage	2.8 V
	Line Regulation	8 mV
	Load Regulation	16 mV
	Accuracy	±0.6%
	Polarity	Positive
	Mounting Type	Surface Mount
	Package Type	UCSP50L1
	Pin Count	4
	Output Type	Fixed
	Dimensions	0.8 x 0.8 x 0.45mm
	Maximum Input Voltage	5.5 V
	Maximum Operating Temperature	+85 °C
	Minimum Input Voltage	1.7 V
	Height	0.45mm
	Minimum Operating Temperature	-40 °C
	Width	0.8mm
	Length	0.8mm

	Välj alla
	Brand ROHM
	Maximum Output Current 200mA
	Number of Outputs 1
	Output Voltage 2.8 V
	Line Regulation 8 mV
	Load Regulation 16 mV
	Accuracy ±0.6%
	Polarity Positive
	Mounting Type Surface Mount
	Package Type UCSP50L1
	Pin Count 4
	Output Type Fixed
	Dimensions 0.8 x 0.8 x 0.45mm
	Maximum Input Voltage 5.5 V
	Maximum Operating Temperature +85 °C
	Minimum Input Voltage 1.7 V
	Height 0.45mm
	Minimum Operating Temperature -40 °C
	Width 0.8mm
	Length 0.8mm

BUxxSA4 series are high-performance CMOS LDO regulators with output current ability of up to 200-mA. These devices have excellent noise and load response characteristics despite of its low circuit current consumption of 40μA. They are most appropriate for various applications such as power supplies for logic IC, RF, and camera modules.

High Output Voltage Accuracy: ±0.6% (±15mV on VOUT<2.5V)
High Ripple Rejection: 70 dB (Typ, 1 kHz,)
Compatible with small ceramic capacitor (Cin=Cout=0.47 μF)
Low Current Consumption: 40 μA
Output Voltage ON/OFF control
Built-in Over Current Protection Circuit (OCP)
Built-in Thermal Shutdown Circuit (TSD)
Adopting ultra-small WLCSP UCSP50L1

ROHM BU28SA4WGWL-E2, LDO Regulator, 200mA, 2.8 V, ±0.6% 4-Pin, UCSP50L1

Relaterade länkar