Infineon CYUSB3035-BZXI, USB Controller, 1-Channel 4 Mbps, 3.6 V, USB, 1.7 V, 121-Pin TFBGA
- RS-artikelnummer:
- 273-2731
- Tillv. art.nr:
- CYUSB3035-BZXI
- Tillverkare / varumärke:
- Infineon
Mängdrabatt möjlig
Antal (1 fack med 168 enheter)*
47 840,352 kr
(exkl. moms)
59 800,44 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 15 maj 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet | Per Bricka* |
|---|---|---|
| 168 - 168 | 284,764 kr | 47 840,35 kr |
| 336 + | 262,859 kr | 44 160,31 kr |
*vägledande pris
- RS-artikelnummer:
- 273-2731
- Tillv. art.nr:
- CYUSB3035-BZXI
- Tillverkare / varumärke:
- Infineon
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Infineon | |
| Product Type | USB Controller | |
| Number of Transceivers | 1 | |
| Maximum Data Rate | 4Mbps | |
| Sub Type | USB Controller | |
| USB Specification | USB 3.0 | |
| Power Supply Type | Single | |
| ESD Protection | Yes | |
| Minimum Supply Voltage | 1.7V | |
| Maximum Supply Voltage | 3.6V | |
| Package Type | TFBGA | |
| Pin Count | 121 | |
| Supported Protocols | USB | |
| Minimum Operating Temperature | -40°C | |
| Maximum Operating Temperature | 85°C | |
| Standards/Approvals | OTG Specification Revision 2.0, USB 2.0 specification, USB 3.0 Specification Revision 1.0, CEA-936A specification | |
| Width | 1 mm | |
| Series | CYUSB3035 | |
| Automotive Standard | No | |
| Supply Current | 60μA | |
| Välj alla | ||
|---|---|---|
Brand Infineon | ||
Product Type USB Controller | ||
Number of Transceivers 1 | ||
Maximum Data Rate 4Mbps | ||
Sub Type USB Controller | ||
USB Specification USB 3.0 | ||
Power Supply Type Single | ||
ESD Protection Yes | ||
Minimum Supply Voltage 1.7V | ||
Maximum Supply Voltage 3.6V | ||
Package Type TFBGA | ||
Pin Count 121 | ||
Supported Protocols USB | ||
Minimum Operating Temperature -40°C | ||
Maximum Operating Temperature 85°C | ||
Standards/Approvals OTG Specification Revision 2.0, USB 2.0 specification, USB 3.0 Specification Revision 1.0, CEA-936A specification | ||
Width 1 mm | ||
Series CYUSB3035 | ||
Automotive Standard No | ||
Supply Current 60μA | ||
The Infineon Super Speed USB controller has a fully configurable, parallel, general programmable interface called GPIF II, which can connect to any processor, ASIC, or FPGA. GPIF II is an enhanced version of the GPIF in FX2LP, Infineon flagship USB 2.0 product. It provides easy and glue less connectivity to popular interfaces, such as asynchronous SRAM, asynchronous and synchronous address data multiplexed interfaces and parallel ATA. It has integrated the USB 3.0 and USB 2.0 physical layers along with a 32 bit ARM926EJ S microprocessor for powerful data processing and for building custom applications. It implements an architecture that enables 185 MBps data transfer from GPIF II to the USB interface.
Mass storage support
Fully accessible 32 bit CPU
UART support of up to 4 Mbps
Universal serial bus integration
Selectable clock input frequencies
Ultra low power in core power down mode
Relaterade länkar
- Infineon CYUSB3035-BZXC 4Mbps I2S UART 1.8 to 3.3 V, 121-Pin BGA
- Infineon CYUSB3014-BZXI 4Mbps I2S UART 1.8 to 3.3 V, 121-Pin BGA
- Infineon CYUSB3065-BZXI 4Mbps I2S UART 1.8 to 3.3 V, 121-Pin BGA
- Infineon CYUSB3013-BZXC 4Mbps I2S UART 1.8 to 3.3 V, 121-Pin BGA
- Infineon CYUSB3011-BZXC 4Mbps I2S UART 1.8 to 3.3 V, 121-Pin BGA
- Infineon CYUSB3065-BZXC 4Mbps I2S UART 1.8 to 3.3 V, 121-Pin BGA
- Infineon CYUSB2014-BZXI 4Mbps 1.8 to 3.3 V, 121-Pin BGA
- Infineon CYUSB3014-BZXI 5Gbit/s 1.2 V, 121-Pin BGA