Microchip USB2422/MJ, USB Controller, USB 2.0, 3.3 V, 24-Pin SQFN

Se alla USB Interface ICs

Antal (1 förpackning med 5 enheter)*

77,42 kr

(exkl. moms)

96,775 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
Tillfälligt slut
  • 1 900 enhet(er) levereras från den 22 december 2025
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
Per förpackning*
5 +15,484 kr77,42 kr

*vägledande pris

Förpackningsalternativ:
RS-artikelnummer:
177-9718
Tillv. art.nr:
USB2422/MJ
Tillverkare / varumärke:
Microchip
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Brand

Microchip

IC Type

Controller IC

Protocols Supported

USB 2.0

Power Supply Type

Single

ESD Protection

Yes

Typical Single Supply Voltage

3.3 V

Mounting Type

Surface Mount

Package Type

SQFN

Pin Count

24

Dimensions

4.1 x 4.1 x 0.95mm

Height

0.95mm

Length

4.1mm

Maximum Operating Temperature

+70 °C

Minimum Operating Temperature

0 °C

Width

4.1mm

The Microchip USB2422 hub is a low-power, single transaction translator, hub controller IC with two downstream ports for embedded USB solutions. The Microchip hub controller can attach to an upstream port as a Hi-Speed and Full-Speed hub or as a Full-Speed only hub. The Microchip hub supports Low-Speed, Full-Speed, and Hi-Speed (when configured as a Hi-Speed hub) downstream devices on the enabled downstream ports.

High performance, low-power, small footprint hub controller IC with two downstream ports
Optimized for minimal bill-of-materials and low-cost designs
Supports the USB Battery Charging Specification, Revision 1.1
Fully integrated USB termination and pull-up/pulldown resistors
Supports a single external 3.3 V supply source, internal regulators provide 1.2 V internal core voltage
On-chip driver for 24 MHz crystal resonator or external 24 MHz clock input
ESD protection up to 6 kV on all USB pins

relaterade länkar