Microchip, Controller IC, 3.6 V, USB 2.0, 3.3 V, 24-Pin SQFN

RS-artikelnummer:: 177-9697
Tillv. art.nr:: USB2422/MJ
Tillverkare / varumärke:: Microchip

Microchip, Controller IC, 3.6 V, USB 2.0, 3.3 V, 24-Pin SQFN

Antal (1 fack med 490 enheter)*

8 780,80 kr

(exkl. moms)

10 976,00 kr

(inkl. moms)

Lägg till 490 enheter för att få fri frakt

Beställningar under 500,00 kr (exkl. moms) kostar 119,00 kr.

I lager

Dessutom levereras 1 470 enhet(er) från den 06 februari 2026

Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"

Enheter	Per enhet	Per Bricka*
490 +	17,92 kr	8 780,80 kr

*vägledande pris

RS-artikelnummer:: 177-9697
Tillv. art.nr:: USB2422/MJ
Tillverkare / varumärke:: Microchip

Specifikationer

Datablad

Lagstiftning och ursprungsland

Produktdetaljer

Hitta liknande produkter genom att välja ett eller flera attribut.

Välj alla	Attribut	Värde
	Brand	Microchip
	Product Type	Controller IC
	USB Specification	USB 2.0
	Sub Type	Controller
	Power Supply Type	Single
	ESD Protection	Yes
	Minimum Supply Voltage	3.3V
	Maximum Supply Voltage	3.6V
	Mount Type	Surface
	Package Type	SQFN
	Pin Count	24
	Supported Protocols	USB 2.0
	Minimum Operating Temperature	0°C
	Maximum Operating Temperature	70°C
	Standards/Approvals	No
	Height	0.95mm
	Length	4.1mm
	Width	4.1 mm
	Series	USB2422
	Automotive Standard	No

	Välj alla
	Brand Microchip
	Product Type Controller IC
	USB Specification USB 2.0
	Sub Type Controller
	Power Supply Type Single
	ESD Protection Yes
	Minimum Supply Voltage 3.3V
	Maximum Supply Voltage 3.6V
	Mount Type Surface
	Package Type SQFN
	Pin Count 24
	Supported Protocols USB 2.0
	Minimum Operating Temperature 0°C
	Maximum Operating Temperature 70°C
	Standards/Approvals No
	Height 0.95mm
	Length 4.1mm
	Width 4.1 mm
	Series USB2422
	Automotive Standard No

Datasheet

The Microchip USB2422 hub is a low-power, single transaction translator, hub controller IC with two downstream ports for embedded USB solutions. The Microchip hub controller can attach to an upstream port as a Hi-Speed and Full-Speed hub or as a Full-Speed only hub. The Microchip hub supports Low-Speed, Full-Speed, and Hi-Speed (when configured as a Hi-Speed hub) downstream devices on the enabled downstream ports.

High performance, low-power, small footprint hub controller IC with two downstream ports

Optimized for minimal bill-of-materials and low-cost designs

Supports the USB Battery Charging Specification, Revision 1.1

Fully integrated USB termination and pull-up/pulldown resistors

Supports a single external 3.3 V supply source, internal regulators provide 1.2 V internal core voltage

On-chip driver for 24 MHz crystal resonator or external 24 MHz clock input

ESD protection up to 6 kV on all USB pins

Microchip, Controller IC, 3.6 V, USB 2.0, 3.3 V, 24-Pin SQFN

Lägg till 490 enheter för att få fri frakt

Relaterade länkar