Microchip MCP2221A-I/P, USB Bridge IC, 12Mbps, 3 to 5.5 V, 14-Pin PDIP

RS-artikelnummer:: 171-7828
Tillv. art.nr:: MCP2221A-I/P
Tillverkare / varumärke:: Microchip

Microchip MCP2221A-I/P, USB Bridge IC, 12Mbps, 3 to 5.5 V, 14-Pin PDIP

Antal (1 förpackning med 5 enheter)*

157,25 kr

(exkl. moms)

196,55 kr

(inkl. moms)

GRATIS leverans för online beställningar över 500,00 kr

I lager

Dessutom levereras 55 enhet(er) från den 22 december 2025
Dessutom levereras 185 enhet(er) från den 29 december 2025

Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"

Enheter	Per enhet	Per förpackning*
5 +	31,45 kr	157,25 kr

*vägledande pris

RS-artikelnummer:: 171-7828
Tillv. art.nr:: MCP2221A-I/P
Tillverkare / varumärke:: Microchip

Specifikationer

Datablad

Lagstiftning och ursprungsland

Produktdetaljer

Hitta liknande produkter genom att välja ett eller flera attribut.

Välj alla	Attribut	Värde
	Brand	Microchip
	Number of Transceivers	1
	Data Rate	12Mbps
	IC Type	Controller IC
	Power Supply Type	Single
	ESD Protection	Yes
	Typical Single Supply Voltage	3 to 5.5 V
	Mounting Type	Through Hole
	Package Type	PDIP
	Pin Count	14
	Dimensions	0.77 x 0.28 x 0.19in
	Height	4.83mm
	Length	19.56mm
	Maximum Operating Temperature	+85 °C
	Minimum Operating Temperature	-40 °C
	Automotive Standard	AEC-Q100
	Width	7.11mm

	Välj alla
	Brand Microchip
	Number of Transceivers 1
	Data Rate 12Mbps
	IC Type Controller IC
	Power Supply Type Single
	ESD Protection Yes
	Typical Single Supply Voltage 3 to 5.5 V
	Mounting Type Through Hole
	Package Type PDIP
	Pin Count 14
	Dimensions 0.77 x 0.28 x 0.19in
	Height 4.83mm
	Length 19.56mm
	Maximum Operating Temperature +85 °C
	Minimum Operating Temperature -40 °C
	Automotive Standard AEC-Q100
	Width 7.11mm

Microchip Technology USB Controller

The Microchip Technology PDIP package, through-hole mount 14-pin USB bridge microcontroller has a voltage rating ranging between 3V and 5.5V. This device reduces external components by integrating the USB termination resistors and the oscillator needed for USB operation. It is a USB-to-UART/I2C serial converter that enables USB connectivity in applications that have a UART and I2C interfaces.

Features and Benefits

• Bus-powered or self-powered
• Data rate is 12Mbit/s
• Fully configurable VID and PID assignments and string descriptors
• General Purpose Input/Output (GPIO) pins which support clock output, ADC, DAC and interrupt detector
• Highly configurable
• Operating temperature ranges between -40°C and 85°C
• Supports Electrostatic Discharge (ESD) protection
• USB 2.0 compliant

Applications

• Automobile engine control systems
• Electronic devices
• Embedded systems
• Remote control systems

Certifications

• AEC-Q100