Teng Tools Vridmomentnyckel av klicktyp 1/2 in Fyrkant fäste, 70 To 350 Nm, 632mm

Se alla Momentnycklar

Antal (1 enhet)*

2 765,92 kr

(exkl. moms)

3 457,40 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
Lagerinformation är för närvarande otillgänglig - kom tillbaka senare
Enheter
Per enhet
1 +2 765,92 kr

*vägledande pris

Kalibrerade alternativ:

presentation
Teng Tools Vridmomentnyckel av klicktyp 1/2 in Fyrkant fäste, 70 To 350 Nm, 632mm
RS-artikelnummer
223-1295

Varje

3 411,92 kr

(exkl. moms)

4 264,90 kr

(inkl. moms)

RS-artikelnummer:
222-2952
Tillv. art.nr:
1292AG-E4
Tillverkare / varumärke:
Teng Tools
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Varumärke

Teng Tools

Undertyp

Justerbart Klick Typ

Produkttyp

Vridmomentnyckel av klicktyp

Vridmomentområde

70 To 350 Nm

Drivenhetsform

Fyrkant

Enhetsstorlek

1/2 in

Total längd

632mm

Noggrannhet

4 %

Skalgraderingar

1Nm

Ytbehandling

Satin krom

Material

Legerat stål

Standarder/godkännanden

DIN 3122, ISO 6789

Höjdsäker

NO

RoHS-status: Undantagen

COO (ursprungsland):
TW
The Teng Tools 1/2" drive calibrated torque wrench which can be used for both tightening and final checking of the torque. The torque wrench is reversible with a lever but only for right hand action for torque checking. Equipped with an angular gauge for after tightening. Graduated in Nm and ft./lbs. Features a lockable setting and has accuracy of +/- 4%. According to DIN3122 with a satin finish. All Teng Tools torque wrenches are individually tested and certified at the time of manufacture. However, this torque wrench comes with a certificate of tests conducted at the time of dispatch from our central warehouse. All tests and equipment conform to the relevant ISO standards and individual torque wrenches will be checked and a certificate issued at the time the order is placed with us. The cost of this service is included in the price of this CT type torque wrench.

1/2” drive torque wrench covering 70-350Nm

Equipped with an in-built angular gauge for easier after tightening of stretch bolts (TTY torque to yield fasteners)

Click type mechanism with easily recognisable signal when the required torque is reached

Simple to adjust and easy to read Nm scale

Additional ft./lb reference scale (range 50-250 ft./lb)

Twist locking facility to ensure the set torque is maintained

Clearly marked with three bands to show the correct place onthe handle where pressure should be applied to give a moreaccurate torque reading

Reversible 24 teeth ratchet mechanism (DIN3122) giving 15° increments for strength and for added reference when torqueing stretch bolts

Designed to torque right hand (clockwise) fasteners

Accurate to +/- 4% and conforms to ISO6789 for assured reliability and accuracy

Relaterade länkar