OPTIBELT 420 H 075 Timing Belt, 84 Teeth, 1066.8mm Length, 19.1mm Width
- RS-artikelnummer:
- 204-3232
- Tillv. art.nr:
- 420 H 075
- Tillverkare / varumärke:
- OPTIBELT
Mängdrabatt möjlig
Antal (1 enhet)*
274,74 kr
(exkl. moms)
343,42 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 3 enhet(er) är redo att levereras från en annan plats
- Dessutom levereras 7 enhet(er) från den 02 februari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 - 4 | 274,74 kr |
| 5 - 9 | 264,10 kr |
| 10 - 24 | 258,27 kr |
| 25 + | 252,90 kr |
*vägledande pris
- RS-artikelnummer:
- 204-3232
- Tillv. art.nr:
- 420 H 075
- Tillverkare / varumärke:
- OPTIBELT
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | OPTIBELT | |
| Length | 1066.8mm | |
| Width | 19.1mm | |
| Pitch | 12.7mm | |
| Number of Teeth | 84 | |
| Profile | H | |
| Material | Rubber | |
| Series | ZR | |
| Tooth Height | 2.3mm | |
| Minimum Operating Temperature | -30°C | |
| Maximum Operating Temperature | +100°C | |
| Välj alla | ||
|---|---|---|
Brand OPTIBELT | ||
Length 1066.8mm | ||
Width 19.1mm | ||
Pitch 12.7mm | ||
Number of Teeth 84 | ||
Profile H | ||
Material Rubber | ||
Series ZR | ||
Tooth Height 2.3mm | ||
Minimum Operating Temperature -30°C | ||
Maximum Operating Temperature +100°C | ||
The Optibelt Timing Belt has 1066mm pitch length. The linear belts with trapezoidal profile is manufactured from sleeves in a spiral cut method. This open-ended timing belts are reinforced with glass cord.
Pitch length 1066mm
High level of tensile strength
Maximum angle misalignment of 0.67° (depending on width)
Maintenance-free
Established worldwide
For low levels of strain
Section standardised: ISO 5296 / ISO 5294
Standard roll length: 30 m
High level of tensile strength
Maximum angle misalignment of 0.67° (depending on width)
Maintenance-free
Established worldwide
For low levels of strain
Section standardised: ISO 5296 / ISO 5294
Standard roll length: 30 m
Relaterade länkar
- OPTIBELT 420 DH 075 Double Sided Timing Belt 1066.8mm Length, 19.1mm Width
- OPTIBELT 420 L 075 Timing Belt 1066.8mm Length, 19.1mm Width
- OPTIBELT 420 DL 075 Double Sided Timing Belt 1066.8mm Length, 19.1mm Width
- OPTIBELT 420 H 200 Timing Belt 1066.8mm Length, 50.8mm Width
- OPTIBELT 420 H 150 Timing Belt 1066.8mm Length, 38.1mm Width
- OPTIBELT 420 H 300 Timing Belt 1066.8mm Length, 76.2mm Width
- OPTIBELT 420 H 100 Timing Belt 1066.8mm Length, 25.4mm Width
- OPTIBELT 420 DH 200 Double Sided Timing Belt 1066.8mm Length, 50.8mm Width