OPTIBELT 270 L 050 Timing Belt, 72 Teeth, 685.8mm Length, 12.7mm Width
- RS-artikelnummer:
- 204-3199
- Tillv. art.nr:
- 270 L 050
- Tillverkare / varumärke:
- OPTIBELT
Mängdrabatt möjlig
Antal (1 enhet)*
130,93 kr
(exkl. moms)
163,66 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 30 enhet(er) är redo att levereras från en annan plats
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 - 4 | 130,93 kr |
| 5 - 9 | 125,78 kr |
| 10 - 24 | 122,98 kr |
| 25 + | 120,62 kr |
*vägledande pris
- RS-artikelnummer:
- 204-3199
- Tillv. art.nr:
- 270 L 050
- Tillverkare / varumärke:
- OPTIBELT
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | OPTIBELT | |
| Length | 685.8mm | |
| Width | 12.7mm | |
| Pitch | 9.5mm | |
| Number of Teeth | 72 | |
| Profile | L | |
| Material | Rubber | |
| Series | ZR | |
| Tooth Height | 1.9mm | |
| Minimum Operating Temperature | -30°C | |
| Maximum Operating Temperature | +100°C | |
| Välj alla | ||
|---|---|---|
Brand OPTIBELT | ||
Length 685.8mm | ||
Width 12.7mm | ||
Pitch 9.5mm | ||
Number of Teeth 72 | ||
Profile L | ||
Material Rubber | ||
Series ZR | ||
Tooth Height 1.9mm | ||
Minimum Operating Temperature -30°C | ||
Maximum Operating Temperature +100°C | ||
The Optibelt Timing Belt has 685mm pitch length. The linear belts with trapezoidal profile is manufactured from sleeves in a spiral cut method. This open-ended timing belts are reinforced with glass cord.
Pitch length 685mm
High level of tensile strength
Maximum angle misalignment of 0.67° (depending on width)
Maintenance-free
Established worldwide
For low levels of strain
Section standardised: ISO 5296 / ISO 5294
Standard roll length: 30 m
High level of tensile strength
Maximum angle misalignment of 0.67° (depending on width)
Maintenance-free
Established worldwide
For low levels of strain
Section standardised: ISO 5296 / ISO 5294
Standard roll length: 30 m
Relaterade länkar
- OPTIBELT 270 DL 050 Double Sided Timing Belt 685.8mm Length, 12.7mm Width
- SKF PHG 270-L-050 Timing Belt 685.8mm Length, 12.7mm Width
- OPTIBELT 270 L 100 Timing Belt 685.8mm Length, 25.4mm Width
- OPTIBELT 270 L 075 Timing Belt 685.8mm Length, 19.1mm Width
- Contitech 270 L 050 Timing Belt 685.5mm Length, 12.7mm Width
- OPTIBELT 270 DL 075 Double Sided Timing Belt 685.8mm Length, 19.1mm Width
- OPTIBELT 270 DL 100 Double Sided Timing Belt 685.8mm Length, 25.4mm Width
- SKF PHG 270-L-100 Timing Belt 685.8mm Length, 25.4mm Width