OPTIBELT 510 H 200 Timing Belt, 102 Teeth, 1295.4mm Length, 50.8mm Width
- RS-artikelnummer:
- 204-2908
- Tillv. art.nr:
- 510 H 200
- Tillverkare / varumärke:
- OPTIBELT
Mängdrabatt möjlig
Antal (1 enhet)*
789,94 kr
(exkl. moms)
987,42 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- 3 enhet(er) levereras från den 22 april 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 - 4 | 789,94 kr |
| 5 - 9 | 758,35 kr |
| 10 - 24 | 742,56 kr |
| 25 + | 726,77 kr |
*vägledande pris
- RS-artikelnummer:
- 204-2908
- Tillv. art.nr:
- 510 H 200
- Tillverkare / varumärke:
- OPTIBELT
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | OPTIBELT | |
| Length | 1295.4mm | |
| Width | 50.8mm | |
| Pitch | 12.7mm | |
| Number of Teeth | 102 | |
| Profile | H | |
| Material | Rubber | |
| Series | ZR | |
| Tooth Height | 2.3mm | |
| Minimum Operating Temperature | -30°C | |
| Maximum Operating Temperature | +100°C | |
| Välj alla | ||
|---|---|---|
Brand OPTIBELT | ||
Length 1295.4mm | ||
Width 50.8mm | ||
Pitch 12.7mm | ||
Number of Teeth 102 | ||
Profile H | ||
Material Rubber | ||
Series ZR | ||
Tooth Height 2.3mm | ||
Minimum Operating Temperature -30°C | ||
Maximum Operating Temperature +100°C | ||
The Optibelt Timing Belt has 1295 mm pitch length. The linear belts with trapezoidal profile is manufactured from sleeves in a spiral cut method. This open-ended timing belts are reinforced with glass cord.
Pitch length 1295mm
High level of tensile strength
Maximum angle misalignment of 0.67° (depending on width)
Maintenance-free
Established worldwide
For low levels of strain
Section standardised: ISO 5296 / ISO 5294
Standard roll length: 30 m
High level of tensile strength
Maximum angle misalignment of 0.67° (depending on width)
Maintenance-free
Established worldwide
For low levels of strain
Section standardised: ISO 5296 / ISO 5294
Standard roll length: 30 m
Relaterade länkar
- OPTIBELT 510 DH 200 Double Sided Timing Belt 1295.4mm Length, 50.8mm Width
- SKF PHG 510-H-200 Timing Belt 1295.4mm Length, 50.8mm Width
- OPTIBELT 510 H 300 Timing Belt 1295.4mm Length, 76.2mm Width
- OPTIBELT 510 H 150 Timing Belt 1295.4mm Length, 38.1mm Width
- OPTIBELT 510 H 075 Timing Belt 1295.4mm Length, 19.1mm Width
- OPTIBELT 510 H 100 Timing Belt 1295.4mm Length, 25.4mm Width
- OPTIBELT 510 DH 150 Double Sided Timing Belt 1295.4mm Length, 38.1mm Width
- OPTIBELT 510 DH 100 Double Sided Timing Belt 1295.4mm Length, 25.4mm Width