PR Electronics Temperaturgivare 4500, Temperaturingång -200 °C 48V till 850 °C

Se alla Temperaturgivare
Tillfälligt slut
RS-artikelnummer:
175-6337
Tillv. art.nr:
5437A2S
Tillverkare / varumärke:
PR Electronics
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Varumärke

PR Electronics

Produkttyp

Temperaturgivare

Utgångstyp

Relä

Diameter

44mm

Lägsta temperaturinmatning

-200°C

Maximal temperaturinmatning

850°C

Serie

4500

Djup

20.2mm

Maximal matningsspänning

48V

Minsta arbetsstemperatur

-40°C

Maximal arbetstemperatur

80°C

Certifiering för farligt område

EU RO marin, IECEx, DNV GL,, UL, ATEX, Hårdvaruutvärdering, EAC, Zon 2, Zon, FM

Standarder/godkännanden

NE 43, NE 21

COO (ursprungsland):
DK

5437A2S


The 5437A can be mounted in zone 2 and zone 22 / Class I, Division 1, Groups A, B, C, D.

5437 HART 7 Dual Input Temperature Transmitter


PR Electronics 5437 dual input temperature transmitter offers unrivalled performance in the most demanding of applications to convert a wide array of input types to a 4 – 20 mA output signal. The transmitter has 7 input terminals measuring one or two sensors, including two 4-wire RTDs, with individual sensor error detection. Configuring the transmitter with either HART 7 or HART 5 protocols provide flexibility and future proof communication.

Sensor Inputs


The PR 5437 provides unrivalled dual input versatility. Virtually any thermocouple or RTD plus linear resistance up to 100 kΩ, potentiometer, and bipolar mV signals. Input sensor redundancy function maintains process availability and safety by seamlessly switching to backup sensor in the event of primary sensor failure. An alert via HART can be used to allow scheduling of maintenance on the faulty sensor.

Installation Characteristics


Wiring - Innovative housing design means the 5437 temperature transmitter can be wired from either the inside or the outside of the terminals.

1/4” centre hole – A large diameter centre hole for easier installation over a wide range of probe mounting diameters.

Loop test pins - Accessible test pins allow measurement of loop current directly while maintaining loop integrity.

Status LED - On-board LED indicates faults according to NAMUR NE44 and NE107.

Jumper pins - Jumpers allow selection of write protection and transmitter burnout options.

Features and Benefits


• LED provides visual notification of sensor, transmitter, and loop status

• HART 7 and HART 5 communication protocols

• Sensor redundancy function switches to backup sensor in the event of sensor failure

• Sensor drift detection maintains measuring point reliability

• Flexible dual input capability, with choice of output modes

• Superior accuracy ensures true, reliable measurements

• Fast response time easily supports safety and cost-critical applications

• Very low temperature coefficient ensuring maximum accuracy across changing ambient conditions

• High galvanic isolation (2.5 kVAC / 55 VAC) providing protection from ground loops, high voltage transients and common mode interference

• Runtime meters provide a valuable history of the process temperature and the ambient temperature around the transmitter

Approvals

SIL Certification
Full third party functional safety assessment to SIL 2 / SIL 3. According to IEC 61508-2010 including firmware assessment to SIL 3. SIL enable/disable function to suit individual applications.

Relaterade länkar