Jumo Temperaturgivare 707051, Typ Analog 32V dc

Se alla Temperaturgivare

Antal (1 enhet)*

2 063,82 kr

(exkl. moms)

2 579,78 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
Lagerförs av tillverkaren
  • Redo att levereras från 15 maj 2026 den
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 +2 063,82 kr

*vägledande pris

RS-artikelnummer:
278-709
Tillv. art.nr:
707051/8-07/000
Tillverkare / varumärke:
Jumo
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Varumärke

Jumo

Produkttyp

Temperaturgivare

Ingångstyp

Analog

Utgångstyp

Analog

Serie

707051

Djup

70.5mm

Maximal matningsspänning

32V dc

Minsta arbetsstemperatur

-10°C

Maximal arbetstemperatur

70°C

Certifiering för farligt område

Nej

Standarder/godkännanden

DIN 43760, IEC 60751, UL, RoHS, DIN EN 61326-1

COO (ursprungsland):
DE
The Jumo Transmitter acquire sensor signals from RTD temperature probe, thermocouples, resistance transmitter or resistance/potentiometer. When using a resistance/potentiometer or RTD temperature probe, the sensor connection on the input side can be made in two-, three- or four-wire circuit. Voltage signals in the range of -100 to +1100 mV can also be recorded. Depending on the selection of the measuring input, the linearization variants linear, temperature linear and the possibility of a comfortably configurable customer-specific linearization are available. The configuration of the transmitter to probe type, probe connection technology, measuring range (freely adjustable) and linearization is carried out with a setup program on the PC. With the USB interface the min/max process value recorded by the transmitter, the min/max operating temperature can be read out and the sensor wiring can be checked online.

The operating status of the transmitter is signaled by a two color control LED

In a faulty free operation it lights up green

If a malfunction occurs, such as a probe break, this is shown by a blink code

The output signal of the transmitter is 4 to 20 mA or 0 to 10 V

The measuring input and the output signal are galvanically isolated from each other

Reversion of the output signal is possible for both types

The connection to the PC is established by a USB interface, which requires no additional auxiliary voltage

Relaterade länkar