Fluke calibration 9102S/RS-256 Temperature Calibrator

A drywell offering a combination of extreme portability and good performance to meet the requirements associated with high speed, high volume industrial calibrations in a shop floor environment. Use the instruments independently or together to make fast zero and span calibrations of temperature sensors.

Drywell ideal for checking dial gauges, digital thermometers, bulb switches, and other sensors that need calibration below ambient.
Fast and easy calibrations of temperature sensors
Temperature range –10°C to 122°C, expandable to –10 °C to 375 °C when used with a 9100S drywell (see stock no. 537-026)
2 x 1/2 “ dia wells enabling one can be used for a reference thermometer to increase accuracy. Inserts are available to suit other sensor sizes.
Direct interface to the Fluke 744 Documenting Process Calibrator

For inserts to accept 1/8” dia. sensor see stock no. 537-000
For inserts to accept 1/4” dia. sensor see stock no. 537-010
For inserts to accept 3/8” dia. sensor see stock no. 537-016
For 9102S carry case see stock no. 537-054

Power Cord, User's Guide with Report of Calibration, RS-232 Cable, 9930 Interface-it Software and User's Guide

Need to prioritise precision when configuring your instruments? Set them up with this temperature calibrator from FLUKE. It's a dry-well type, so it comes with an internal heat source that gives off a thermal reading when you insert a probe into it. As it features two wells, it pulls double duty and lets you use one well as a reference point for increased accuracy. When it's time to adjust your dial gauges, digital thermometers and bulb switches, use this handy tool to keep your appliances in line.

• Deep well depth of 102mm to handle long probes
• Wide temperature setting range between -10°C and +122°C for use with demanding applications
• High accuracy of ±0.25°C for results you can count on

• Water plants
• Chemical factories
• Manufacturing industry
• Medical technology

The component has a rapid ambient heating time of 10 minutes to a temperature of +100°C, so you won't be left hanging around waiting to take readings. It takes just 10 minutes to cool back down to 0°C.

’Buy a Fluke, Get one Free’ is back!!
Between March 1st, 2024 and August 31st, 2024, the customer spends €150 or more on a qualifying Fluke product (Fluke Industrial, Fluke Calibration, Fluke Networks, or Beha-Amprobe).
Customer claims their tool online at: www.fluke.com/en/freefluke
A proof of purchase in the form of a receipt or invoice is required.
Note: Offer not available in South Africa

Fluke 9100 Series Drywell Heat Sources