Moflash LEDD125 serien Signallampa, Bärnsten lins, Stadig, Blinkande 280V dc, LED Vägg, Yta 150mA IP65

Se alla Signallampor

Antal (1 enhet)*

1 477,50 kr

(exkl. moms)

1 846,88 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • Dessutom levereras 7 enhet(er) från den 27 april 2026
  • Dessutom levereras 2 enhet(er) från den 18 maj 2026
  • Dessutom levereras 4 enhet(er) från den 01 juni 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 +1 477,50 kr

*vägledande pris

RS-artikelnummer:
674-2003
Tillv. art.nr:
LEDD125-02-01
Tillverkare / varumärke:
Moflash
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Varumärke

Moflash

Produkttyp

Signallampa

Ljuseffekt

Stadig, Blinkande

Linsfärg

Bärnsten

Husmaterial

ABS-plast

Typ av glödlampa

LED

Typ av fäste

Vägg, Yta

Strömtyp

DC

Strömförbrukning

150mA

Basdiameter

98mm

Husfärg

Svart

Lampa ingår

Ja

Maximal matningsspänning

280V dc

Serie

LEDD125

Minsta arbetsstemperatur

-20°C

Maximal arbetstemperatur

55°C

Höjd

162mm

IP-klassning

IP65

Standarder/godkännanden

CE Certified

COO (ursprungsland):
GB

Moflash Multifunction Amber LED Beacon, 24V DC, 162mm Height - LEDD125 Series - LEDD125-02-01


This amber LED (light-emitting diode) beacon from Moflash is a highly visible safety signal for your workplace. The bright light shines through the amber-coloured lens to warn of a change in the environment that requires attention. The beacon can be mounted onto a machine surface or wall for flexible installation. You can use the jumper link on the PCB (printed circuit board) to switch between a steady mode or two different flashing modes, making it a versatile choice. Thanks to its wide operating temperature range of -20°C to +45°C, it's suitable for use in demanding environments.

Features & Benefits


• Beam angle of 360° around the vertical axis for wide visibility throughout the surrounding area

• Polycarbonate (PC) lens and ABS (acrylonitrile butadiene styrene) plastic base are ultraviolet (UV) stable to prevent discolouration when exposed to sunlight

• Low current consumption of 150mA for energy efficiency

Applications


• Factory equipment

• Machine automation

• Road maintenance vehicles

• Security conveyors

Is this beacon protected against dust and moisture?


Yes, this beacon has an IP65 (ingress protection) rating. This means it's protected against low-pressure water jets from any direction, as well as dust.

Moflash Multi-Function LED Beacon - LEDD125 Series


The LEDD 125 Beacons are suitable for fire, security and industrial applications. These beacons offer three alternative light modes: Continuously ON, Rapid Flash (120 FPM) and Standard Flash (60FPM), which can be selected by a dip switch mounted lens side on the PCB. The AC units are supplied with one meter of flying lead, while the DC units allow for termination inside the base enclosure. An M12 sealing grommet in the base allows for cable entry.

100000 hours life for LED

48 LED array ultra bright

360° visibility

Continuously ON, rapid flash (120 FPM) or standard flash (60FPM)

3 point fixing

UV stable polycarbonate lens and ABS base

IP65 protection

RoHS compliant

CE marking

Relaterade länkar