KEMET Polymer, Magnetic Shielding Sheet, 185mm x 70mm x 0.1mm
- RS-artikelnummer:
- 181-5975
- Tillv. art.nr:
- M4(100)-185X70T0800
- Tillverkare / varumärke:
- KEMET
Mängdrabatt möjlig
Antal (1 enhet)*
106,02 kr
(exkl. moms)
132,52 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 25 enhet(er) är redo att levereras
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 - 4 | 106,02 kr |
| 5 - 9 | 101,70 kr |
| 10 - 19 | 96,43 kr |
| 20 - 39 | 91,28 kr |
| 40 + | 83,78 kr |
*vägledande pris
- RS-artikelnummer:
- 181-5975
- Tillv. art.nr:
- M4(100)-185X70T0800
- Tillverkare / varumärke:
- KEMET
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | KEMET | |
| Material | Polymer base blended with micron sized magnetic powders | |
| Fixing Method | Self-Adhesive | |
| Thickness | 0.1mm | |
| Series | M4 | |
| Length | 185mm | |
| Width | 70mm | |
| Peak Frequency | 13.56MHz | |
| Operating Temperature Range | -40 → +125 °C | |
| Maximum Operating Temperature | +105°C | |
| Minimum Operating Temperature | -40°C | |
| Välj alla | ||
|---|---|---|
Brand KEMET | ||
Material Polymer base blended with micron sized magnetic powders | ||
Fixing Method Self-Adhesive | ||
Thickness 0.1mm | ||
Series M4 | ||
Length 185mm | ||
Width 70mm | ||
Peak Frequency 13.56MHz | ||
Operating Temperature Range -40 → +125 °C | ||
Maximum Operating Temperature +105°C | ||
Minimum Operating Temperature -40°C | ||
- COO (Country of Origin):
- JP
The KEMET Magnetic Sheet for radio frequency identification (RFID) Flex Suppressor® prevents interference between a loop antenna and metallic objects and effectively improves the communication rage of RFID. The flexible sheet is a polymer base, blended with micronsized magnetic powders dispersed throughout the material. These sheets improve the magnetic flux convergence and can be cut into a variety of shapes and sizes.
Magnetic flux convergence improvement - increases the relative permeability (u’) while keeping the magnetic loss(u”) low Effective carrier frequency 13.56 MHz and below
Resistant to shock, not brittle
Thin, flexible material used in portable equipment
Virtually no limitation in where it can be used
Less time required for installation
Easily cut into any shape
Easily laminates the Flex Suppressor® roll to the tag roll
Halogen-free
Resistant to shock, not brittle
Thin, flexible material used in portable equipment
Virtually no limitation in where it can be used
Less time required for installation
Easily cut into any shape
Easily laminates the Flex Suppressor® roll to the tag roll
Halogen-free