RS PRO Schackel, Stål, D-schackel, Skruvsprint, 3.5 t, godsdiameter 2.22 mm

Se alla Schackel

Antal (1 enhet)*

331,43 kr

(exkl. moms)

414,29 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • 23 enhet(er) är redo att levereras
  • Plus 2 enhet(er) är redo att levereras från en annan plats
  • Dessutom levereras 24 enhet(er) från den 25 mars 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 +331,43 kr

*vägledande pris

RS-artikelnummer:
674-061
Tillverkare / varumärke:
RS PRO
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Varumärke

RS PRO

Produkttyp

Schackel

Material

Stål

Schackeltyp

D-schackel

Stifttyp

Skruvsprint

Säker arbetsbelastning

3.5t

Schackeldiameter

2.22mm

Käftbredd

34.93mm

Stiftdiameter

25.4mm

Ytbehandling

Zinkpläterad

Standarder/godkännanden

No

RoHS-status: Undantagen

COO (ursprungsland):
GB

RS PRO D-Shackle, Zinc-Plated Steel, 3.5 tonne


This shackle from RS PRO is designed for securing loads, either as a tie-down or for lifting. They are rated for up to 3.5 tonnes each and can fit a 1 3/8 in rope or chain to be held securely. As a screw pin shackle, it's secured by passing the pin between the jaws and screwing it tight, though additional tightening torque can be provided by passing a bar through the hole in the pin if required. The one-inch pin can be passed through a mounting point on the load or ground to hold it down.

This type of shackle is suitable for use in shipping for securing cargo, attaching a load to a crane or anywhere else where a physical connection is required. The high-tensile galvanised steel construction ensures both strength and resistance to corrosion.

Features and Benefits


• Screw pin

• D-shackle

• Zinc-plated finish

• Zinc-plated steel material

• Jaw width of 1 3/8 in

• Pin diameter of 1 in

• Shackle diameter of 7/8 in

• Safe working load of 3.5 t