SKF Nitrile Rubber Seal, 48mm ID, 65mm OD, 10mm

RS-artikelnummer:: 267-0283
Tillv. art.nr:: 48X65X10 HMSA10 RG
Tillverkare / varumärke:: SKF

SKF Nitrile Rubber Seal, 48mm ID, 65mm OD, 10mm

Se alla Seals

Antal (1 förpackning med 10 enheter)*

216,53 kr

(exkl. moms)

270,66 kr

(inkl. moms)

GRATIS leverans för online beställningar över 500,00 kr

I lager

Dessutom levereras 80 enhet(er) från den 05 januari 2026

Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"

Enheter	Per enhet	Per förpackning*
10 +	21,653 kr	216,53 kr

*vägledande pris

RS-artikelnummer:: 267-0283
Tillv. art.nr:: 48X65X10 HMSA10 RG
Tillverkare / varumärke:: SKF

Specifikationer

Datablad

Lagstiftning och ursprungsland

Produktdetaljer

Hitta liknande produkter genom att välja ett eller flera attribut.

Välj alla	Attribut	Värde
	Brand	SKF
	Inside Diameter	48mm
	Outside Diameter	65mm
	Seal Type	Rotary Shaft Seal
	Thickness	10mm
	Seal Material	Nitrile Rubber
	Minimum Operating Temperature	-40°C
	Maximum Operating Temperature	+100°C

	Välj alla
	Brand SKF
	Inside Diameter 48mm
	Outside Diameter 65mm
	Seal Type Rotary Shaft Seal
	Thickness 10mm
	Seal Material Nitrile Rubber
	Minimum Operating Temperature -40°C
	Maximum Operating Temperature +100°C

COO (Country of Origin):: CN

SKF Seal, Nitrile Rubber, 65mm Outside Diameter - 48X65X10 HMSA10 RG

This radial shaft seal from SKF features a rubber outside diameter and a single sealing lip, ideal for use with oil or grease applications. It is designed to optimise sealing against the shaft even in polluted environments, offering high pumping rate, contamination exclusion with a dust lip, and accommodating misalignment.

Features & Benefits

• High pumping rate
• Higher contamination exclusion with dust lip
• Garter spring for optimised sealing
• Accommodates misalignment

Applications

• Ideal for use between rotating and stationary machine components or components in relative motion
• Suitable for applications requiring a radial shaft seal with a rubber outside diameter

Can it be used for applications with high pumping rates and contamination concerns?

Yes, this seal is designed to offer a high pumping rate and higher contamination exclusion with a dust lip.

Will it accommodate misalignment between machine components?

Yes, it is designed to accommodate misalignment and optimise sealing against the shaft.

Is it suitable for applications with rotating and stationary machine components?

Yes, it is ideal for use between rotating and stationary machine components or components in relative motion.