SKF, ID 60 mm ID Kona, UT 130 mm UT, 282 kN Rullager, 1 Rader, 37 mm, 290 kN, 48.5 mm, Skärmad, 5300rpm

Se alla Rullager

Antal (1 enhet)*

1 319,98 kr

(exkl. moms)

1 649,98 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
Tillfälligt slut
  • Leverans från den 23 juni 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 +1 319,98 kr

*vägledande pris

RS-artikelnummer:
208-0065
Tillv. art.nr:
32312
Tillverkare / varumärke:
SKF
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Varumärke

SKF

Produkttyp

Rullager

Invändig diameter

60mm

Borrtyp

Parallell

Hastighetsbegränsning

5300rpm

Konbredd

48.5mm

Antal rader

1

Koppbredd

37mm

Standarder/godkännanden

No

Ändtyp

Skärmad

Utvändig diameter

130mm

Statisk belastning

290kN

Lagrets dynamiska belastning

282kN

Lagertyp

Kona

COO (ursprungsland):
DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.

Low friction

Enhanced operational reliability

Rigid bearing application

A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.

Running-in period with reduced temperature peaks

Separable and interchangeable

The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.

Relaterade länkar