SKF, ID 45 mm ID Kona, UT 100 mm UT, 145 kN Rullager, 1 Rader, Stål, 30 mm, 185 kN, 38.25 mm, Skärmad, 7000rpm

Se alla Rullager

Antal (1 enhet)*

682,18 kr

(exkl. moms)

852,72 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
Lagerinformation är för närvarande otillgänglig - kom tillbaka senare
Enheter
Per enhet
1 +682,18 kr

*vägledande pris

RS-artikelnummer:
208-0062
Tillv. art.nr:
32309
Tillverkare / varumärke:
SKF
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Varumärke

SKF

Produkttyp

Rullager

Invändig diameter

45mm

Borrtyp

Parallell

Burmaterial

Pressat stål

Rullmaterial

Stål

Ändtyp

Skärmad

Lagrets dynamiska belastning

145kN

Standarder/godkännanden

No

Utvändig diameter

100mm

Hastighetsbegränsning

7000rpm

Statisk belastning

185kN

Koppbredd

30mm

Antal rader

1

Konbredd

38.25mm

Lagermaterial

Stål

Typ av lopp

Avsmalnande

Lagertyp

Kona

COO (ursprungsland):
DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.

Low friction

Enhanced operational reliability

Rigid bearing application

A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.

Running-in period with reduced temperature peaks

Separable and interchangeable

The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.

Relaterade länkar