SKF, ID 17 mm ID Kona, UT 47 mm UT, 35.4 kN Rullager, 1 Rader, Stål, 16 mm, 34.3 kN, 20.25 mm, Skärmad, 16000rpm

Se alla Rullager

Antal (1 enhet)*

292,45 kr

(exkl. moms)

365,56 kr

(inkl. moms)

Add to Basket
välj eller skriv kvantitet
I lager
  • Dessutom levereras 1 enhet(er) från den 04 maj 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter
Per enhet
1 +292,45 kr

*vägledande pris

RS-artikelnummer:
208-0055
Tillv. art.nr:
32303
Tillverkare / varumärke:
SKF
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla

Varumärke

SKF

Produkttyp

Rullager

Invändig diameter

17mm

Borrtyp

Parallell

Burmaterial

Pressat stål

Utvändig diameter

47mm

Statisk belastning

34.3kN

Koppbredd

16mm

Antal rader

1

Lagermaterial

Stål

Konbredd

20.25mm

Hastighetsbegränsning

16000rpm

Ändtyp

Skärmad

Lagrets dynamiska belastning

35.4kN

Standarder/godkännanden

No

Lagertyp

Kona

Typ av lopp

Avsmalnande

The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.

Low friction

Enhanced operational reliability

Rigid bearing application

A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.

Running-in period with reduced temperature peaks

Separable and interchangeable

The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.

Relaterade länkar