Timken 30213 Taper 65 mm ID Metric Roller Bearing, 120 mm OD
- RS-artikelnummer:
- 193-0998
- Tillv. art.nr:
- 30213
- Tillverkare / varumärke:
- Timken
Mängdrabatt möjlig
Antal (1 enhet)*
857,01 kr
(exkl. moms)
1 071,26 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 23 februari 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 - 4 | 857,01 kr |
| 5 - 9 | 806,51 kr |
| 10 - 24 | 790,16 kr |
| 25 + | 772,91 kr |
*vägledande pris
- RS-artikelnummer:
- 193-0998
- Tillv. art.nr:
- 30213
- Tillverkare / varumärke:
- Timken
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Timken | |
| Product Type | Metric Roller Bearing | |
| Inside Diameter | 65 mm | |
| Bore Type | Tapered | |
| Cone Width | 24.75mm | |
| Number of Rows | 1 | |
| Cup Width | 20mm | |
| Static Load Rating | 158kN | |
| Outside Diameter | 120 mm | |
| End Type | Shielded | |
| Limiting Speed | 5600rpm | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 164 kN | |
| Bearing Type | Taper | |
| Välj alla | ||
|---|---|---|
Brand Timken | ||
Product Type Metric Roller Bearing | ||
Inside Diameter 65 mm | ||
Bore Type Tapered | ||
Cone Width 24.75mm | ||
Number of Rows 1 | ||
Cup Width 20mm | ||
Static Load Rating 158kN | ||
Outside Diameter 120 mm | ||
End Type Shielded | ||
Limiting Speed 5600rpm | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 164 kN | ||
Bearing Type Taper | ||
- COO (Country of Origin):
- CN
Timken tapered roller bearing components are precisely designed to manage both axial and radial loads.
Metric tapered roller bearing matched assemblies consist of two single-row bearings (type TS) with individually matched spacers that are set at the factory to pre-determined dimensions and tolerances.
The standard outer ring spacer is designed with lubricationholes to allow for lubricant flow into both bearing rows.
Matched bearing assemblies are supplied ready-to-fit into customer applications, with a unique serial number marked on spacers and bearing components for easy identification.
• Pre-set clearance simplifies mounting
• Higher productivity and greater uptime through precise setting
• High axial and radial load carrying capacity
• Axial loads accommodated in both directions
Relaterade länkar
- NTN 4T-30213 Taper Roller 65 mm ID Taper Roller Bearing, 120 mm OD
- Timken 32213 Taper 65 mm ID Metric Roller Bearing, 120 mm OD
- SKF 30213 Taper 65 mm ID Roller Bearing, 120 mm OD
- RS PRO 30213 Taper 65 mm ID Roller Bearing, 120 mm OD
- Timken 32013X Taper 65 mm ID Metric Roller Bearing, 100 mm OD
- Timken JLM710949C/JLM710910 Taper 65 mm ID Roller Bearing, 105 mm OD
- Timken JM511946/JM511910 Taper 65 mm ID Roller Bearing, 110 mm OD
- Timken 30207 Taper 35 mm ID Metric Roller Bearing, 72 mm OD