Timken 30207 Taper 35 mm ID Metric Roller Bearing, 72 mm OD
- RS-artikelnummer:
- 193-0992
- Tillv. art.nr:
- 30207
- Tillverkare / varumärke:
- Timken
Mängdrabatt möjlig
Antal (1 enhet)*
268,90 kr
(exkl. moms)
336,12 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
I lager
- 16 enhet(er) är redo att levereras
- Plus 6 enhet(er) är redo att levereras från en annan plats
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 - 4 | 268,90 kr |
| 5 - 9 | 252,90 kr |
| 10 - 24 | 247,63 kr |
| 25 + | 242,59 kr |
*vägledande pris
- RS-artikelnummer:
- 193-0992
- Tillv. art.nr:
- 30207
- Tillverkare / varumärke:
- Timken
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | Timken | |
| Product Type | Metric Roller Bearing | |
| Inside Diameter | 35 mm | |
| Bore Type | Tapered | |
| Roller Material | Steel | |
| Bearing Dynamic Load Rating | 60.6 kN | |
| End Type | Open | |
| Outside Diameter | 72 mm | |
| Bearing Material | Steel | |
| Standards/Approvals | No | |
| Static Load Rating | 63.6kN | |
| Cup Width | 15mm | |
| Number of Rows | 1 | |
| Cone Width | 18.25mm | |
| Bearing Type | Taper | |
| Välj alla | ||
|---|---|---|
Brand Timken | ||
Product Type Metric Roller Bearing | ||
Inside Diameter 35 mm | ||
Bore Type Tapered | ||
Roller Material Steel | ||
Bearing Dynamic Load Rating 60.6 kN | ||
End Type Open | ||
Outside Diameter 72 mm | ||
Bearing Material Steel | ||
Standards/Approvals No | ||
Static Load Rating 63.6kN | ||
Cup Width 15mm | ||
Number of Rows 1 | ||
Cone Width 18.25mm | ||
Bearing Type Taper | ||
Timken tapered roller bearing components are precisely designed to manage both axial and radial loads.
Metric tapered roller bearing matched assemblies consist of two single-row bearings (type TS) with individually matched spacers that are set at the factory to pre-determined dimensions and tolerances.
The standard outer ring spacer is designed with lubricationholes to allow for lubricant flow into both bearing rows.
Matched bearing assemblies are supplied ready-to-fit into customer applications, with a unique serial number marked on spacers and bearing components for easy identification.
• Pre-set clearance simplifies mounting
• Higher productivity and greater uptime through precise setting
• High axial and radial load carrying capacity
• Axial loads accommodated in both directions
Relaterade länkar
- RS PRO 30207 Taper 35 mm ID Metric Roller Bearing, 72 mm OD
- NTN 4T-30207 Taper Roller 35 mm ID Taper Roller Bearing, 72 mm OD
- Timken 32207 Taper 35 mm ID Metric Roller Bearing, 72 mm OD
- Timken 33207 Taper 35 mm ID Metric Roller Bearing, 72 mm OD
- FAG 30207-XL Taper 35 mm ID Roller Bearing, 72 mm OD
- SKF 30207 J2/Q Taper 35 mm ID Roller Bearing, 72 mm OD
- Timken 30306 Taper 30 mm ID Metric Roller Bearing, 72 mm OD
- Timken 32306 Taper 30 mm ID Metric Roller Bearing, 72 mm OD