FAG 31309-XL Taper 45 mm ID Roller Bearing, 100 mm OD
- RS-artikelnummer:
- 190-8363
- Tillv. art.nr:
- 31309-XL
- Tillverkare / varumärke:
- FAG
Mängdrabatt möjlig
Antal (1 enhet)*
1 014,05 kr
(exkl. moms)
1 267,56 kr
(inkl. moms)
GRATIS leverans för online beställningar över 500,00 kr
Tillfälligt slut
- Leverans från den 23 juli 2026
Behöver du mer? Ange den kvantitet du behöver och klicka på "Kontrollera leveransdatum"
Enheter | Per enhet |
|---|---|
| 1 - 4 | 1 014,05 kr |
| 5 - 9 | 973,28 kr |
| 10 - 24 | 953,12 kr |
| 25 + | 932,85 kr |
*vägledande pris
- RS-artikelnummer:
- 190-8363
- Tillv. art.nr:
- 31309-XL
- Tillverkare / varumärke:
- FAG
Specifikationer
Datablad
Lagstiftning och ursprungsland
Produktdetaljer
Hitta liknande produkter genom att välja ett eller flera attribut.
Välj alla | Attribut | Värde |
|---|---|---|
| Brand | FAG | |
| Product Type | Roller Bearing | |
| Inside Diameter | 45 mm | |
| Bore Type | Tapered | |
| Cage Material | Steel | |
| Cone Width | 27.25mm | |
| Outside Diameter | 100 mm | |
| End Type | Open | |
| Bearing Dynamic Load Rating | 114 KN | |
| Static Load Rating | 108kN | |
| Standards/Approvals | No | |
| Bearing Type | Taper | |
| Välj alla | ||
|---|---|---|
Brand FAG | ||
Product Type Roller Bearing | ||
Inside Diameter 45 mm | ||
Bore Type Tapered | ||
Cage Material Steel | ||
Cone Width 27.25mm | ||
Outside Diameter 100 mm | ||
End Type Open | ||
Bearing Dynamic Load Rating 114 KN | ||
Static Load Rating 108kN | ||
Standards/Approvals No | ||
Bearing Type Taper | ||
High radial loads occur
High axial loads act on one side
Combined loads must be supported (radial and axial forces acting simultaneously)
Precise axial guidance of the shaft is required (locating bearing function)
The bearing arrangement must have very high axial rigidity
The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)
High running accuracy is required
The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required
The bearings are not required to compensate misalignments
The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity
relaterade länkar
- FAG 32009-X-XL Taper 45 mm ID Roller Bearing, 75 mm OD
- FAG 22209-E1-XL-K-C3 Taper 45 mm ID Roller Bearing, 85 mm OD
- RS PRO 31309 Taper 44 mm ID Roller Bearing, 100 mm OD
- FAG 32309-A Taper Roller 45 mm ID Roller Bearing, 100 mm OD
- FAG 32948-XL Taper Roller 240 mm ID Tapered Roller Bearing, 320 mm OD
- SKF 31309 J2/QCL7CDF Taper 44 mm ID Roller Bearing, 100 mm OD
- SKF 31309 J2/QCL7C Taper 44 mm ID Roller Bearing, 100 mm OD
- FAG 32205-XL Taper 25 mm ID Roller Bearing, 52 mm OD